37611
3
Zoom out
Zoom in
Previous page
1/4
Next page
3
USER'S GUIDE
How to:
Select a 12 hour or a 24 hour clock display.
Select a °C or a °F temperature display.
Change between Winter Time and Summer Time at the press of a
button.
Convert the TP75-RF to act as a thermostat, controlling at the
selected temperature continuously.
Use the TP75-RF as a frost thermostat.
Use the holiday function.
Override the programmed temperature.
Extend an existing temperature for 1, 2 or 3 hours.
Heating System Performance.
The TP75-RF includes one in-built and two optional energy saving and
comfort enhancement features that may have been enabled by your
installer. All will affect the way in which the heating system operates,
and this will be different from that provided by conventional time
controls and room thermostats.
The in-built feature is an intelligent electronic anticipator which measures
the rate of temperature rise then switches the boiler off before the set
temperature is reached. However the required comfort temperature
will be reached due to the residual heat in the system after the boiler
has shut down. This feature is only activated when the room temperature
is 2°C or more lower than the set temperature.
If the optional Optimum Start Control feature has been enabled,
(indicated by the display showing typically 0:30 and OP after the
second press of the PROG button from the RUN mode), then the boiler
will fire some time before the programmed event 1 time to provide the
event 1 comfort temperature by that time.
If the optional Chrono-proportional feature has been enabled, then the
boiler will fire at regular intervals to maintain radiator temperature and
so prevent the large swings in room temperature caused by radiators
alternating between very hot and cold. In mild weather and when the
system is up to temperature the boiler may fire only in short bursts with
long periods of inactivity. This is not a fault, and will provide increased
comfort .
RUN MODE
Whilst the TP75-RF is in RUN mode, i.e. controlling the space
temperature in accordance with the programme, the colon between
the hours and minutes digits blinks. The colon does not blink whilst the
time and programme are being set.
+ 1 HR
+ 2 HR
+ 3 HR Fig. 1. Display following a
RESET. (Colon blinking)
DISPLAY ELEMENTS
(Those that will appear whilst following these user's instructions).
Temperature
override
indicators
Indicates
temperature
display
Extended
temperature
indicators
+ 1 HR
+ 2 HR
+ 3 HR
Programmed temperature
indicator
Boiler ON
indicator
Holiday mode
selected
Programme
type indicator Clock time,
digital
thermometer,
or number of
holiday days
Day of week
+ 1 HR
+ 2 HR
+ 3 HR Fig. 2. Clock set to 12 hour
display.
+ 1 HR
+ 2 HR
+ 3 HR
SELECTING THE CLOCK TYPE (12hr or 24hr)
The factory pre-set clock has a 24 hour display. If a 12 hour display
with AM/PM indication is preferred then press and hold down the NEXT
and DAY buttons until the display changes. Repeat to return to a 24
hour display.
SELECTING THE TEMPERATURE DISPLAY
(°C or °F)
The factory pre-set temperature display is °C. If a °F display is
preferred then press and hold down the DAY and COPY buttons until
the display changes. Repeat to return to a °C display.
Fig. 3. Temperature range
changed to Fahrenheit.
LEARN
TP75-RF with integral sensor
Electronic Programmable Room Thermostat
with Wireless Communication
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Danfoss TP75-RF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss TP75-RF in the language / languages: English as an attachment in your email.

The manual is 0.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Danfoss TP75-RF

Danfoss TP75-RF Installation Guide - English - 4 pages

Danfoss TP75-RF User Manual - German - 4 pages

Danfoss TP75-RF User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info