654641
40
Zoom out
Zoom in
Previous page
1/104
Next page
40
Opción 12 – Ajuste del precalentamiento para el control de arranque óptimo
(opción 11 ajustada en 1)
Pulse + hasta que aparezca la opción 12, use Λ y V para
seleccionar el ajuste requerido (únicamente activo si la
opción 11 está ajustada en 1).
El control de arranque óptimo debe ser ajustado para adaptarse a las
características del aislamiento térmico del edifi cio. Utilice los pulsadores Λ y V
para seleccionar el período de precalentamiento requerido. En la tabla inferior se
sugieren los ajustes típicos.
Si el edifi cio no puede alcanzar la temperatura deseada en el tiempo prefi jado,
aumente diariamente el ajuste en pasos de 15 minutos hasta encontrar el valor
adecuado.
Si el edifi cio alcanza la temperatura deseada antes del tiempo prefi jado, disminuya
diariamente el ajuste en pasos de 15 minutos hasta encontrar el valor adecuado.
0:15 15 min., sistemas de aire caliente, edifi cio bien aislado.
0:30 30 min., sistemas de aire caliente, edifi cio bien aislado.
0:45 45 min., sistemas de aire caliente, edifi cio mal aislado.
1:00 60 min., sistema de radiadores, masa térmica baja, edifi cio bien aislado.
(ajuste de fábrica)
1:15 75 min., sistema de radiadores, masa térmica baja, aislamiento medio.
1:30 90 min., sistema de radiadores, masa térmica media, aislamiento malo.
1:45 105 min., sistema de radiadores, masa térmica alta, edifi cio bien aislado.
2:00 120 min., sistema de radiadores, masa térmica alta, edifi cio mal aislado.
Opción 13 – Control de arranque óptimo / Ajuste del retardo del arranque
del evento (Fijar opción 11 a 1 ó 2)
El arranque óptimo o el control de arranque con retardo
puede ser aplicado únicamente al evento 1 o a cada evento
del día que requiera una temperatura más elevada que la
del evento previo. Pulse + hasta que aparezca la opción 13,
use Λ y V para seleccionar el ajuste requerido (únicamente
activo si la opción 11 está ajustada en 1 ó 2).
Ajuste 0 Aplicable únicamente al primer evento del día. (ajuste de fábrica)
Ajuste 1 Aplicable a cada evento del día que requiera una temperatura más
elevada comparada con la del evento previo.
Instrucciones del usuario
ES
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Danfoss TP5001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss TP5001 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Danfoss TP5001

Danfoss TP5001 Installation Guide - English, German, Dutch, Danish, French, Italian, Spanish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info