769352

Danfoss Icon - 230 V Programmable Room Thermostat Manual

2
Zoom out
Zoom in
Previous page
1/6
Next page
VUMBA102
2 | © Danfoss | FHH | 2016.08
User Guide Danfoss Icon™ Programmable Room Sensor 230 V
How to use
Danfoss Icon™
Programmable
Danfoss Icon™ Programmable is easy and intuitive to use:
• You change value with or .
• You scroll between menus and programs with or .
• You confirm with . The screen is flashing shortly to indicate that the new setting is active.
Forecast feature
Danfoss Icon™ Programmable has an automatic Forecast feature, where the thermostat during the first
two weeks adapts itself to the characteristics of the room.
It means that Danfoss Icon™ Programmable learns when to start heating up in order to reach the
desired At Home temperature on time (re-heating times can be very different from room to room).
This is especially important with underfloor heating in heavy floor constructions, because the floor
concrete need to be heated, and it takes time.
Example:
Program P4 is chosen.
Away temperature from 09:00 is set to 18° C.
At Home temperature from 17:00 is set to 21° C.
21°
18°
17:0009:00
15:20
Forecast says: Start heating now!
The Forecast feature has learned that heating must start up at 15:20 in order to reach the At Home
temperature of 21° C at 17:00.
Recommendations
on set-back
temperatures
For a traditional heavy floor heating system with pipes embedded in concrete, Danfoss recommends
Away and Asleep (set-back) temperatures a few degrees lower than the At Home (comfort) tempera-
ture. A larger temperature difference will be “overruled” by the Forecast feature.
With a light (dry) floor construction cooling / heating time is shorter, and you might choose a larger
temperature difference.
Heavy floor heating construction Light floor heating construction
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Danfoss Icon - 230 V Programmable Room Thermostat at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss Icon - 230 V Programmable Room Thermostat in the language / languages: English as an attachment in your email.

The manual is 4.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info