665574
21
Zoom out
Zoom in
Previous page
1/38
Next page
Handleiding RS8ET210 © Danfoss 10-2007 21
2.4c Plaatsen router
Probeer de router zo hoog mogelijk te plaatsen om de com-
municatie met de centrale unit te optimaliseren.
Plaats eerst de router die het dichtst bij de centrale unit is.
Voordat de router denitief wordt gemonteerd, sluit de batterij
aan en houdt de router ongeveer op de denitieve plaats.
Druk op de knop in de router. Voer een ‘linktest’ uit (zie 2.4h voor
meer informatie). Als de linktest mislukt, probeer dan opnieuw
of verplaats de router naar een betere locatie.
Druk het deksel op de achterkant (met voeding).
Werk vanaf de centrale unit in een cirkel naar buiten.
LET OP! Nadat de 230V is aangesloten, duurt het 5
minuten voordat een sensornode functioneert als
een router. Indien nog een router in een bestaand
systeem moet worden geïnstalleerd, moet de hand-
module verwijderd worden en opnieuw geïnstal-
leerd. Ook moet op alle routers en sensornodes een
nieuwe linktest worden uitgevoerd.
2.4d Voorbereiden sensornodes
Open de sensornode met een schroevendraaier.
Plaats de node op een platte ondergrond. Steek schuin
een schroevendraaier in het gat. Druk de schroevendraaier
voorzichtig naar beneden. Doe dit voor beide gaten. Het
deksel wordt nu nog vastgehouden door de pinnen binnenin.
Beweeg het deksel voorzichtig tot deze los komt.
Sluit de batterij aan op het printboard.
De groene LED knippert eenmalig om aan te geven dat de
voeding is aangesloten.
Sluit de sensor aan op het klemmenblok.
Tot 4 sensoren kunnen worden aangesloten, afhankelijk
van het type sensorunit. S1-S4 staat voor sensor 1 tot 4.
De + en – klemmen worden alleen voor routers gebruikt.
2.4e Installatie sensornodes in systeem
Selecteer ‘Installeer node’ in het statusmenu en kies hoeveel
minuten de centrale unit in deze mode moet blijven.
1 minuut is voldoende voor 1 node. Klik ‘Opslaan.
Druk op de knop in de sensornode.
Een piepsignaal zal hoorbaar zijn uit de centrale unit.
Na een paar seconden zijn twee piepsignalen hoorbaar.
De sensornode is nu geïnstalleerd en het systeem is klaar
voor de volgende installatie.
Plaats het deksel nog niet terug op de node. Houdt het deksel
en de achterkant los van elkaar.
Herhaal bovenstaande procedure voor alle sensornodes.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Danfoss AK-WS100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss AK-WS100 in the language / languages: Dutch as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info