745215
9
Zoom out
Zoom in
Previous page
1/46
Next page
9
UK DE CN FR
The subwoofer can be connected to your stereo or surround sound amplifier/receiver in two ways:
1) LINE input: The signal from the amplifier is low pass filtered inside the subwoofer using
one or both of the LINE INPUTS. This way of connecting the subwoofer is typically used
for connecting to a stereo amplifier/receiver.
2) LFE input: The signal from the amplifier is already filtered inside the amplifier when
using the LFE input connector. This way of connecting the subwoofer is typically used for
surround sound (A/V receiver) setups.
NOTE: When the subwoofer is connected to the music/home cinema system, do not power up
the subwoofer until all other components are “ON”.
4.1 STEREO CONNECTIONS
If you want to use DALI SUB M-10 D in a stereo setup, your stereo (pre-) amplifier/receiver should
have either a set of stereo RCA line outputs or a mono RCA line output available (please refer
to the instruction manual of your stereo (pre-)amplifier/receiver). The line output connector(s)
of your stereo (pre-)amplifier/receiver must be connected to the LINE INPUT connectors (LEFT/
RIGHT) of the subwoofer via one or two RCA cables (sold separately).
4.2 SURROUND SOUND CONNECTIONS
4.2.1 LINE INPUT
Use the LINE INPUT connectors LEFT or RIGHT if you want to adjust the subwoofer
frequency output using the DALI SUB M-10 D crossover control.
To use this option, connect the subwoofer output connector(s) of your surround sound
(pre-) amplifier/receiver with the LINE INPUT connectors on the subwoofer using an
RCA cable (sold separately). If the surround sound (pre-)amplifier/receiver has only one
subwoofer output connector, connect it to the LINE INPUT LEFT connector (white) of the
subwoofer using an RCA cable.
Please refer to chapter “5.0 Installing and Adjusting” for instructions on how to make
the adjustments.
4.2.2 LFE INPUT
Use the LFE input connector (black), if you want to adjust the subwoofer output from your
surround sound (pre-) amplifier/receiver. When the LFE input connector is used, the built-in
crossovers are bypassed and the crossover control will not be functioning.
To use this option, connect the surround sound (pre-) amplifier/receiver subwoofer output to the
LFE input connector on the DALI SUB M-10 D with an RCA cable (sold separately).
Please refer to the instruction manual of your surround sound (pre-) amplifier/receiver on how
to adjust the crossover settings.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dali SUB M-10 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dali SUB M-10 D in the language / languages: English, German, French as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dali SUB M-10 D

Dali SUB M-10 D User Manual - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info