Manual Dali SUB K-14F (page 9 of 91) (English, German, Danish, French)

745214

Zoom out

Zoom in

1/91

UK DE DK FR CH

The connections are basically the same as stated in previous chapters, but for stereo setup

you should only connect the left channel output connector of your stereo or surround (pre-)

amplier/receiver to the LINE INPUT L connector on the DALI SUB K-14 F placed to the left

in your room. In a similar way you should connect the right channel output connector of your

stereo or surround (pre-) amplier/receiver to the LINE INPUT R connector on the DALI SUB K-14

F placed to the right in your room.

For a surround setup, split the output signal from your surround sound (pre-) amplier/receiver

using a RCA splitter (sold separately) and connect the two outputs. In all other respects, follow

the instructions above - but use separate channels. Please consult your authorised DALI dealer

if you have further questions.

5.0 INStALLING AND ADJUStING

Start by checking that the voltage of your mains output corresponds to the indication on the

back of your DALI SUB K-14 F. (see Figure 2)

WARNING: If the wrong voltage is supplied, there is a serious risk that the electronics of

the subwoofer will suffer permanent damage.

After checking the VOLTAGE, connect the mains cable and move the POWER switch to ‘ON’. The

subwoofer is adjusted using the controls on the rear side of the subwoofer (see chapter “10.0

Amplier Back Plate”) in accordance with the following tuning method which will help you

achieve the best results: Play a piece of music you know well, preferably one including rhythmic

bass such as kettle drums, bass guitar etc.

Since the performance is highly dependent on the main speakers, the listening room, the

subwoofer position in the room and your personal preferences, we recommend experimenting

with different settings to achieve the best listening results rather than giving any speciﬁc advice

on settings.

NOTE: The position of the subwoofer will signiﬁcantly affect its contribution to the overall sound

(see chapter “3.0 Positioning”). When you have decided which method of connection you want

to use and you have positioned the subwoofer, you can begin the process of tuning the system.

You are now ready to adjust your DALI SUB K-14 F.

5.1 PHASE SETTING

The PHASE switch of the subwoofer has two settings: 0° or 180°. The phase setting will adjust

the timing between the subwoofer and the main speakers. To set the phase, do the following:

1) Turn up the volume of your subwoofer a little higher than you would normally do.

2) Set the crossover point to maximum (120 Hz).

• NOTE: If you have connected the subwoofer via LFE instead of LINE IN you need to set the

crossover point for your subwoofer to maximum in the menu of your surround sound (pre-)

amplier/receiver.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dali SUB K-14F in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dali SUB K-14F Manual

Product: