745053
9
Zoom out
Zoom in
Previous page
1/38
Next page
UK DE DK
9
FR CN
before tightening the screws. Place the loudspeaker upright on its spikes on the floor, so that it
stands steadily without rocking. Tighten the nuts, so the four spikes sit tightly in the aluminium
feet. Be careful not to over tighten the contra nuts.
NOTE: Please be aware that spikes may damage the floor, if the surface is not protected.
NOTE: On some floor surfaces and in some rooms, the use of spikes is a crucial aspect in
obtaining the best result.
3.2 DALI RUBICON 2 C
DALI RUBICON 2 C is optimized for stand mounting, but will also work well on a shelf. If
positioned on a stand or shelf, the enclosed bumpers can be placed under the speaker for
stable and vibration-free positioning (see Figure 3B).
4.0 CONNECTION
The main connections are located on the back of the RUBICON C speaker (see Figure 4)
1) Mains connector
2) Mains power switch
3) Fuse compartment
4) ADC IN
5) USB Service port
6) LINK CONNECT button
5.0 USAGE
Connect the supplied power cord to the mains connector and your mains outlet. Use the mains
power switch to power on the RUBICON C speaker.
NOTE: If the RUBICON C fails to power up when connected to the mains and the power switch
is set to ON, the fuse may have blown or be faulty. Replace the fuse with the same type as
originally supplied – see fuse type on the rear of the amplifier. If the fuse blows repeatedly, have
the RUBICON C speaker checked at an authorised service centre – contact your authorised
dealer.
5.1 CONNECTING THE SPEAKERS
The DALI SOUND HUB. If you have purchased a DALI SOUND HUB with your RUBICON C
speakers follow the guidelines in the SOUND HUB Quick Start Guide to connect your
RUBICON C speakers. ADC IN cabled connection. Connect the RUBICON C speakers to a PRE
OUT. The speaker will in this case operate with fixed gain. DALI recommends using high quality
cables that preferably do not exceed 3 meters.
5.2 FRONT LED
The LED panel on the front of the speaker lights up and indicate the volume level whenever the
volume is changed. When the speaker is muted the outer most LEDs at both ends of the LED
panel will blink to indicates this state.
5.3 AUTO POWER OFF
The RUBICON C will automatically power off if no signal has been detected for a period. The
RUBICON C automatically powers on again the instance an audio signal is detected.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dali Rubicon C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dali Rubicon C in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info