745217
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
Connect cables so that the loudspeaker is in correct phase.
The red (+) loudspeaker terminal must be connected to the
red (+) amplifier terminal. The black (-) loudspeaker terminal
must be connected to the black (-) amplifier terminal.
Remove insulation so that approx. ½” of bare wire is exposed.
Press the top of the terminal down and insert the bare wire
into the opening. When the wire is fully in place with no
loose strands exposed, release the terminal. The cable is now
connected.
Connection of Cables
Grille
NOTE: The grille is very tightly fitted to the loudspeaker to
prevent rattle noise. Therefore the grille can be difficult
to mount and dismount. To dismount the grille, carefully
press one end of the grille while pulling the grille from the
loudspeaker. When dismounted in one end, carefully pull the
other end of the grille. If you cannot grip the ends, you can
carefully use an awl or a small screwdriver. When mounting
the grille, be careful not to scratch the loudspeaker. Follow
the guide for dismounting the grille, but in reverse order.
On the inside of the grille there is a piece of non-woven. The
non-woven is on the grille to protect the drivers against dust
and dirt. Therefore the non-woven must remain on the grille.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dali Ikon Phantom at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dali Ikon Phantom in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info