ENGLISH
98
Emergency operation:
•
Use this operation only when the remote controller is defective or lost.
•
When the emergency operation switch is pressed,the" Pi "sound is heard
once, which means the start of this operation.
•
In this operation, the system automatically selects the operation modes, coo-
ling or heating, according to the room temperature.
•
When machine is running in emergency, the set value of temperature and wind
speed couldn't be altered; meanwhile, it can't operate for dehumidifying or
under timing mode.
Test operation:
Test operation switch is the same as emergency switch.
•
Use this switch in the test operation when the room temperature is below
16ºC, do not use it in the normal operation.
•
Continue to press the test operation switch for more than 5 seconds. After you
hear the "Pi" sound twice, release your finger from the switch: the cooling ope-
ration starts with the air flow speed "Hi".
Removal of the restriction of emergency or test operation
•
Press the emergency operation switch once more, or manipulate through the remote controller; the "Pi" sound, the emer-
gency or test operation is terminated.
•
When the remote controller is manipulated, it gets the system back to the normal operation mode.
Emergency and Test Operation
OPERATION
