Manual Daitsu APD-9CR (page 35 of 92) (English, French, Italian, Portuguese, Spanish)

730615

Zoom out

Zoom in

1/92

INSTALLATION INSTRUCTIONS

Exhaust hose installation:

The exhaust hose and adaptor must be installed

or removed in accordance with the usage mode.

Fig. 19

Fig. 18

Fig. 17

Fig. 16a Fig. 16b

COOL,HEAT(heat pump type) or

AUTO mode

Install

FAN,DEHUMIDIIFY or

HEAT(electrical heat type) mode

Remove

1. Install the adaptor B and adaptor I onto the

exhaust hose as shown in Fig.16a or Fig.16b.

Refer to the previous pages for window kit

installation.

2. Resert the hook of the Exhaust hose into the

hole seat of the air outlet and slide down the

Exhaust hose along the arrow direction (See

Fig.17) for installation.

The exhaust hose can be installed into the

wall

(Not applicable to the units without adaptor

A, expansion plugs and wooden screws of

Accessories ).

1. Prepare a hole in the wall. Install the wall

Exhaust adaptor A onto the wall(outside) by

using 4 expansion plugs and wooden screws,

be sure to x thoroughly. (See Fig.18)

2. Attach the Exhaust hose to wall Exhaust

adaptor A.

Note:

Cover the hole using the adaptor cap when

not in use.

- The exhaust hose can be compressed

or extended moderately according to the

installation requirement, but it is desirable to

keep the hose length to a minimum.

IMPORTANT:

DO NOT OVER BEND THE EXHAUST HOSE

(SEE Fig.19)

CAUTION

Make sure that there is no obstacle around the

air outlet of the exhaust hose (in the range of

500mm) in order to the exhaust system works

properly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Daitsu APD-9CR in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Daitsu APD-9CR Manual

Product: