45471

Daitsu ADD20 Manual

41
Zoom out
Zoom in
Previous page
1/46
Next page
- 41 -
INGLES
Operation
Drainage steps
2. Discard the water
3. Place back the drainage tank
Notation for drainage
● When place back the drainage tank, press the
tank firmly into place with both hands. If the
tank is not positioned properly, the “Tank Full”
sensor will be activated, and the dehumidifier
will not operate.
Check to make sure the guards are firmly atta-
ched to the tank. If they are not, the drainage
tank will be harder to remove.
● If the drainage tank is removed while the unit
is in operation, or immediately after operation
has stopped, water which is still in the cooling
unit may drip out on the base plate. Wait at
least 30 minutes before removing the drainage
tank. (If water has dripped, wipe it up.)
Continuous drainage of water
The unit has a continuous drainage port. Using a commercial hose (with an inner diameter of 15mm),
the water in the drainage tank can be continuously drained out of the continuous port of the unit.
When setting up the equipment for continuous drainage, always stop operation first and unplug the
power supply plug.
Operation
1. Disconnect the drainage tank and open the continuous drainage port.
Use nippers or a similar tool to cut away the continuous drainage
port in the side of the main unit.
2. Push the hose into the continuous drainage port.
Pass a commercial hose (with an inner diameter of 15mm) through
the continuous drainage port, and press it firmly into the drainage
port in the main unit, make sure water does not leak. The level
height of drain piping should always be not higher than the one of
the drainage port, also drain piping should always be not plugged
up, so the condensed water can be drained out successfully.
3. Return the drainage tank to its original position.
Check the hose periodically to make sure it is still connected and has
not been obstructed.
● Draining the water
Drain water
from this point
Guard
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daitsu ADD20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daitsu ADD20 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info