642450
14
Zoom out
Zoom in
Previous page
1/28
Next page
Installation and operation manual
11
EUWA(*)5~24KBZW1
Packaged air-cooled water chillers
4PW61653-1 – 07.2010
Keys provided on the controller:
The function carried out when the user presses one or a combination
of these keys depends on the status of the controller and the unit at
that specific moment.
LEDs provided on the controller and remote interface:
Function during main display (not inside menu)
When selecting a parameter group or parameter, different LEDs
related to the parameter group or parameter are displayed.
Example: The LEDs F and G are displayed when accessing a
parameter group or when accessing parameters directly.
Direct and user parameters
The digital controller provides direct and user parameters. The direct
parameters are important for the everyday usage of the unit, e.g. to
adjust the temperature setpoint or to consult actual operational
information. The user parameters on the contrary provide advanced
features such as adjusting time delays.
Each parameter is defined by a code and a value. For example: the
parameter used to select local or remote on/off control has code
h07 and value 1 or 0.
For an overview of the parameters, refer to "Overview of the direct
and user parameters" on page 14.
Working with the units
This chapter deals with the everyday usage of the units. Here, you
will learn how to perform routine tasks, such as:
"Switching the unit on" on page 12 and "Switching the unit off"
on page 12,
"Adjusting the cooling temperature setpoint" on page 12,
"Consulting actual operational information" on page 13,
"Resetting alarms" on page 13,
"Resetting warnings" on page 13.
Keys digital
controller
Keys remote
interface
Main display Sensor readout menu Parameter selection menu Parameter setting menu
AT
Press once:
Return
Press once:
Return
Press once:
Cancel and return
BU
Press for 5 seconds:
To be able to access
DIRECT parameters
Press once:
Select parameter group or
parameter
Press once:
Confirm and return
A + BS
Press for 5 seconds:
A + B OR
Press once:
S
To be able to access USER
parameters (after entering
USER password)
CC
Press for 5 seconds:
Has no effect on these units.
Press once: Direct access to
readout menu sensor
(b01/b02/b03)
Press once:
Select previous sensor
parameter
Press once:
Select previous parameter
group or parameter
Press once:
Increase value
DD
Press for 5 seconds:
Switch unit on/off in cooling
mode
Press once: Direct access to
readout menu sensor
(b01/b02/b03)
Press once:
Select next sensor
parameter
Press once:
Select next parameter group
or parameter
Press once:
Decrease value
C + DR
Press for 5 seconds:
Manually alarm reset in the
event of alarm
Leds digital controller
Remote
interface
Main display
P
Led (green) Z Inlet water temperature.
F
Led (amber)
F
Not active.
G
Led (amber)
G
Indicates that cooling mode is
active.
H
Led (red) Y
Indicates that the alarm is
active.
L
Led (amber)
L
Indicates the status of the
pump
M
Led (amber)
M
LED, indicates that at least
one compressor is active.
&
Led (amber)
&
LED is on, indicates that
compressor 1 is active.
LED is flashing, indicates
compressor 1 startup request.
é
Led (amber)
é
LED is on, indicates that
compressor 2 is active.
LED is flashing, indicates
compressor 2 startup request.
NOTE
Temperature readout tolerance: ±1°C.
Legibility of the numeric display may decrease in direct
sunlight.
4PW61653-1_digital_EN.book Page 11 Thursday, August 26, 2010 1:49 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daikin EUWA water chillers at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daikin EUWA water chillers in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info