643443
44
Zoom out
Zoom in
Previous page
1/1009
Next page
CHASSIS
BRAKE FLUID
CHANGE
WARNING:
· Do not mix the different kind and manufacture of brake fluid.
Recommended brake fluid:
FMVSS116 DOT3 or SAE J1703
CAUTION:
· If the brake fluid is spilled inadvertently over the paint finish surface of the vehicle or the resin made
part, immediately wipe off the brake fluid and flush with fresh water.
· Be sure to follow the draining order of each wheel cylinder. The draining should be performed from
the farthermost wheel cylinder from the brake master cylinder, one by one.
MA–26
1. Remove the brake bleeder plug cap.
2. Connect the suitable bleeder hose to the bleeder plug.
3. Prepare a suitable container and connect one end of the
bleeder hose in the container.
4. Depress the brake pedal and have a person hold it in a
depressed state.
5. Slacken the bleeder plug to drain the brake fluid by anoth-
er person and tighten the bleeder plug temporarily.
6. Repeat the steps 4 to 5 until the brake fluid in the reservoir
tank becomes zero.
However, at this state be very careful not to suck the air
into the brake line, except cases where draining of the
brake fluid is required.
7. Replenish the new brake fluid into the reservoir tank and
maintain the brake fluid level in the reservoir tank at the
MAX level during the following operation.
8. Drain the old brake fluid or air from each brake line start-
ing from the farthest wheel cylinder from the master cylin-
der one by one following the manner mentioned in the
steps 4 to 5 repeatedly.
9. Tighten the air bleeder plugs to the specified tightening
torque.
Tightening Torque: 6.9 - 9.8 N·m (0.7 - 1.0 kgf-m)
10. Ensure that no air exists in the brake line by depressing
the brake pedal firmly.
If air is remaining in the brake line, perform the air bleed-
ing by following the procedure described in the steps 4 to
5 repeatedly, until air will be discharged. Then, tighten the
bleeder plug to the specified tightening torque.
11. Install the brake bleeder plug cap.
Front
Rear
JMA00072-00000
JMA00073-00056
JMA00074-00057
JMA00075-00058
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daihatsu Terions J100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daihatsu Terions J100 in the language / languages: English as an attachment in your email.

The manual is 41,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info