Figure 4-87
2. Select day and the check box in front of the period, and set period.
Note
There are six periods which can be set every day.
The setting will be applied to the whole week if it selects all, you can also select the check box in
front of the day to make separate setting upon several days.
3. Select the snapshot type of corresponding period.
4. Click "Save" and the system will return to the interface of "Snapshot Schedule". Different colors
means different types of snapshot schedule. Green means general snapshot schedule, yellow
means motion snapshot schedule and red means alarm snapshot schedule.
Step 4
Click "Save" to complete setting.
4.5.1.3 Set Holiday Schedule
It is to set specific date as holiday. It will snapshot and record according to the holiday snapshot
schedule and record schedule when the snapshot and record are enabled in the holiday schedule.
Note
It needs to set the holiday record schedule or snapshot schedule when it is to realize snapshot
according to holiday. Please refer to "4.5.1.1 Set Record Schedule" and "4.5.1.2 Set Snapshot
Schedule" for more details.
Step 1
Select "Setup > Storage > Schedule > Holiday Schedule" and the system will display the interfac of
"Holiday Schedule", which is shown in Figure 4-88.