670262
146
Zoom out
Zoom in
Previous page
1/190
Next page
Step 4
Calibration area.
1. Click "Add Calibration" and draw calibration area in the monitoring image, right click to end drawing.
2. Select "Horizontal" and set the corresponding actual length of the horizontal ruler, and draw
horizontal ruler in the calibration area.
3. Select "Vertical" and set the corresponding actual length of the vertical ruler, and draw vertical ruler
in the calibration area.
4. Ruler verification
Select "Width Verification", click "Calibration" and draw the length which needs to be verified in
the calibration area.
Select "Height Verification", click "Calibration" and draw the length which needs to be verified in
the calibration area.
Note
Select "Area", Click "remove" to delete the calibration area.
Select the added "Vertical" or "horizontal", click "Remove Ruler" to delete the rulers which are not
needed.
Step 5
It is to configure the parameters of global setup, which is shown in Table 4-37.
Parameter
Note
Anti-disturb
Enable
Select "Enable" to enable anti-disturb function.
It is to filter leaf shake and water ripple which cause disturbance to the
device intelligent analysis.
Shadow Scene
Enable
Select "Enable" to enable shadow scene filter function.
As for the scene with shadow, it can make target box contain target
itself only (exclude shadow), the target with several shadows can be
separately detected, which provides more accurate initial target
position. It will be misjudged that the shadow is excluded if part of target
is similar to the shadow.
Sensitivity
The bigger the value is, the easier for low contrast target and small
target to be triggered, the bigger the virtual detection rate is, the bigger
the false detection rate becomes.
Tracking Overlap
Rate
It can recognize the target only when the overlap rate with original
position after target moves is smaller than the valid target overlap rate
which has been set.
Valid Tracking
Distance
It can recognize the target only when the ratio between moving pixel on
the image for the target and image width pixel of certain proportion is
bigger than the valid tracking distance which has been set.
Valid Tracking
Time
It can recognize target when the target movement time is bigger than
the valid tracking time which has been set.
Table 4-37
146


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dahua PSD81602-A360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dahua PSD81602-A360 in the language / languages: English as an attachment in your email.

The manual is 6,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dahua PSD81602-A360

Dahua PSD81602-A360 Quick start guide - English - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info