The system will pop out a dialog box of Modify IP, which is shown in Figure 2-4.
Figure 2-4
Step 5
Select the mode of setting IP address according to the actual situation.
DHCP: Set mode as DHCP when there is DHCP server in the network, then the device will
automatically acquire IP address from DHCP server.
Manual mode: Set mode as Static and fill in the Start IP, Subnet Mask and Gateway, and then the
device IP address will be modified from Start IP sequentially.
Note
Select Same IP and the selected devices will be set with the same IP address.
Step 6
Click OK to complete modification.
2.2 Log in WEB Interface
It can log in device WEB interface via browser and realize device operation, config and maintenance
after IP address has been modified.
Background Info
Please refer to Table 2-1 for the recommended config of PC which logs in device WEB interface.