Abbildung 4-119
4.11.3.3 Anormalität
Es gibt zwei Typen: Festplatte/Netzwerk (Festplatte/Netzwerk)
Festplatte (HDD): Festplattenfehler, keine Festplatte, kein Speicherplatz. Siehe Abbildung 4-120 und
Abbildung 4-121.
Netzwerk (Network): Getrennt, IP-Konflikt, MAC-Konflikt, Ungültige Anmeldung. Siehe Abbildung
4-122 und Abbildung 4-123.
Alarmausgang (Alarm output): Wählen Sie den Alarmausgang (Mehrfachauswahl).
Weniger als (Less than): Das System alarmiert Sie, wenn der Speicherplatz der Festplatte kleiner als der hier
eingestellte Grenzwert ist (nur Festplatten ohne Speicherplatztyp).
Sperre (Latch): Hier stellen Sie die entsprechende Verzögerungszeit ein. Der Wert reicht von 1s-300s. Das
System verzögert die Alarmabschaltung automatisch um die eingestellten Sekunden und aktiviert den
Ausgang, nachdem ein externer Alarm abgebrochen wurde.
Versuch(e) (Attempt(s): Hier stellen Sie die Anmeldeversuche ein. Überschreiten die Anmeldeversuche den
hier eingestellten Grenzwert, wird das aktuelle Konto gesperrt. Diese Funktion ist nur für ungültige
Anmeldungen.
Sperrzeit (Lock time): Hier stellen Sie die Kontosperrzeit ein, wenn die Anmeldeversuche den eingestellten
Grenzwert überschreiten. Diese Funktion ist nur für ungültige Anmeldungen.
Nachricht anzeigen (Show message): Das System zeigt die Alarmnachricht auf dem lokalen Bildschirm an,
wenn es zu einem Alarm kommt.
Alarm-Upload (Alarm upload): Das System kann das Alarmsignal auf das Netzwerk hochladen (einschließlich
Alarmcenter) wenn diese Funktion aktiviert ist. Für die Ereignisse Trennen, IP-Konflikt und MAC-Konflikt ist
diese Funktion ungültig.