Abbildung 4-81
4.11.2 Netzwerk
4.11.2.1 TCP/IP
Das Einzel-Netzwerkadaptermenü ist in Abbildung 4-82 dargestellt und das Doppel-Netzwerkadaptermenü in
Abbildung 4-83
Netzwerkmodus (Netzwerk Mode): Umfasst Mehrfachzugriff (Multiple access), Fehlertoleranz (Fault
tolerance) und Lastausgleich (Load balancing).
Mehrfachzugriffmodus (Multiple-address mode): eth0 und eth1 arbeiten separat. Nutzen Sie Dienste
wie HTTP, RTP über eth0 oder eth1. Gewöhnlich müssen Sie eine Standardkarte einstellen
(Standardeinstellung ist eth0), um den automatischen Netzwerkdienst vom Geräteende wie DHCP,
E-Mail, FTP usw. anzufragen. Im Mehradressenmodus wird der System-Netzwerkstatus als offline
angezeigt, sobald eine Karte offline ist.
Netzwerk-Fehlertoleranz (Network fault-tolerance): In diesem Modus verwendet das Gerät bond0 zur
Kommunikation mit den externen Geräten. Sie können sich auf eine Host-IP-Adresse konzentrieren.
Gleichzeitig müssen Sie eine Masterkarte einstellen. Gewöhnlich läuft nur eine Karte (Masterkarte).
Das System kann eine alternative Karte aktivieren, wenn die Masterkarte eine Fehlfunktion hat. Das
System wird als offline angezeigt, sobald diese beiden Karten offline sind. Bitte beachten Sie, dass
diese beiden Karten im gleichen LAN sein müssen.
Lastausgleich (Load balance): In diesem Modus verwendet das Gerät bond0 zur Kommunikation mit
den externen Geräten. eth0 und eth1 arbeiten beide und tragen die Netzlast. Deren Netzlast ist
gewöhnlich gleich. Das System wird als offline angezeigt, sobald diese beiden Karten offline sind. Bitte
beachten Sie, dass diese beiden Karten im gleichen LAN sein müssen.
Standard-Netzwerkkarte (Default Network Card): Wählen Sie eth0/eth1/bond0 (optional), nachdem Sie die
Mehrfachzugrifffunktion aktiviert haben.
Haupt-Netzwerkkarte (Main Network Card): Wählen Sie eth0/eth1 (optional). Nach Aktivierung der
Mehrfachzugrifffunktion.