758701
18
Zoom out
Zoom in
Previous page
1/26
Next page
Digital VTH
(Version 4.2)
Quick Start Guide
V1.1.4
I
Cybersecurity Recommendations
Mandatory actions to be taken towards cybersecurity
1. Change Passwords and Use Strong Passwords:
The number one reason systems get “hacked” is due to having weak or default passwords. It is
recommended to change default passwords immediately and choose a strong password
whenever possible. A strong password should be made up of at least 6 numbers.
2. Update Firmware
As is standard procedure in the tech-industry, we recommend keeping NVR, DVR, and IP
camera firmware up-to-date to ensure the system is current with the latest security patches and
fixes.
“Nice to have” recommendations to improve your network security.
1. Change Passwords Regularly
Regularly change the credentials to your devices to help ensure that only authorized users are
able to access the system.
2. Physically Lock Down the Device:
Ideally, you want to prevent any unauthorized physical access to your system. The best way to
achieve this is to install the recorder in a lockbox, locking server rack, or in a room that is
behind a lock and key.
3. Isolate NVR and IP Camera Network
The network your NVR and IP camera resides on should not be the same network as your
public computer network. This will prevent any visitors or unwanted guests from getting access
to the same network the security system needs in order to function properly.
II
Foreword
General
This document mainly introduces structure, installation process, debugging and verification
process of digital VTH products.
Device Upgrade
Please don’t cut off power supply during device upgrade. Power supply can be cut off only after
the device has completed upgrade and has rebooted.
Safety Instructions
The following categorized signal words with defined meaning might appear in the Manual.
Signal Words
Meaning
Provides methods to help you solve a problem or save you time.
Provides additional information as the emphasis and supplement to
the text.
Revision History
No.
Version
Revision Content
Release Date
1
V1.0.0
First release
March 13, 2019
Privacy Protection Notice
As the device user or data controller, you might collect personal data of others, such as face,
fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be
in compliance with the local privacy protection laws and regulations to protect the legitimate
rights and interests of other people by implementing measures, including but not limited to:
providing clear and visible identification to inform data subject the existence of surveillance
area and providing related contact.
About the Guide
The Guide is for reference only. If there is inconsistency between the Guide and the actual
product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply with the Guide.
The Guide would be updated according to the latest laws and regulations of related
regions. For detailed information, see the paper User's Manual, CD-ROM, QR code or our
III
official website. If there is inconsistency between paper User's Manual and the electronic
version, the electronic version shall prevail.
All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the Guide. Please
contact the customer service for the latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations description, or
errors in print. If there is any doubt or dispute, please refer to our final explanation.
Upgrade the reader software or try other mainstream reader software if the Guide (in PDF
format) cannot be opened.
All trademarks, registered trademarks and the company names in the Guide are the
properties of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem
occurred when using the device.
If there is any uncertainty or controversy, please refer to our final explanation.
IV
Important Safeguards and Warnings
The following description is the correct application method of the device. Please read the Guide
carefully before use, in order to prevent danger and property loss. Strictly conform to the Guide
during application and keep it properly after reading.
Operating Requirement
Please don’t place and install the device in an area exposed to direct sunlight or near heat
generating device.
Please don’t install the device in a humid, dusty or fuliginous area.
Please keep its horizontal installation, or install it at stable places, and prevent it from
falling.
Please don’t drip or splash liquids onto the device; don’t put on the device anything filled
with liquids, in order to prevent liquids from flowing into the device.
Please install the device at well-ventilated places; don’t block its ventilation opening.
Use the device only within rated input and output range.
Please don’t dismantle the device arbitrarily.
The device shall be used with screened network cables.
Power Requirement
The product shall use electric wires (power wires) recommended by this area, which shall
be used within its rated specification!
Please use power supply that meets SELV (safety extra low voltage) requirements, and
supply power with rated voltage that conforms to Limited Power Source in IEC60950-1. For
specific power supply requirements, please refer to device labels.
Appliance coupler is a disconnecting device. During normal use, please keep an angle that
facilitates operation.
V
Table of Contents
Cybersecurity Recommendations ......................................................................................................... I
Foreword ................................................................................................................................................. II
Important Safeguards and Warnings .................................................................................................. IV
1 Product Structure ............................................................................................................................... 1
1.1 Front Panel .................................................................................................................................... 1
1.2 Rear Panel Port............................................................................................................................. 2
1.2.1 VTH5221 Series /VTH5241 Series ..................................................................................... 2
1.2.2 VTH5221E-H/VTH5221EW-H ............................................................................................ 2
1.2.3 VTH15 Series Type A/Type B/Type CH .................................................. 错误!未定义书签。
1.2.4 VTH5222CH/VTH5222CHW-2 ........................................................................................... 3
1.2.5 VTH1660CH ....................................................................................................................... 4
1.2.6 VTH2221A .......................................................................................................................... 4
2 Installation and Debugging ............................................................................................................... 6
2.1 Installation ..................................................................................................................................... 6
2.1.1 Surface Installation ............................................................................................................. 6
2.1.2 Installation with 86 Box ....................................................................................................... 7
2.1.3 Desktop Installation with Bracket ....................................................................................... 7
2.2 Debugging ..................................................................................................................................... 8
2.2.1 VTO Settings....................................................................................................................... 8
2.2.2 VTH Settings ..................................................................................................................... 13
2.3 Debugging Verification ................................................................................................................ 18
2.3.1 VTO Calls VTH ................................................................................................................. 18
2.3.2 VTH Monitors VTO ........................................................................................................... 19
1
1 Product Structure
1.1 Front Panel
Different models of devices may have different front panel dimensions and key types, but keys
or indicators with the same silkscreen or icon have the same function. Please refer to Table 1-1
for details.
Name
Description
SOS
Press this key to call the Call Center in case of emergency.
Menu
Press this key to return to main menu.
Call
In case of incoming call, press this key to answer the call.
During talk, press this key to hang up.
During monitoring, press this key to speak to unit VTO, villa
VTO, fence station and verifying VTO.
During speaking, press this key to exit speaking.
Monitor
In standby mode, press this key to monitor the main VTO.
During monitoring, press this key to exit monitoring.
Unlock
In case of incoming call, talk, monitoring and speaking of VTO,
press this key to unlock corresponding VTO.
Message
indicator
If this indicator turns on, it represents that there are unread
messages.
Power
indicator
If this indicator turns on in green, it represents normal power
supply.
Network
indicator
If this indicator turns on, it represents normal
communication with VTO.
If this indicator turns off, it represents abnormal
communication with VTO.
DND
indicator
If this indicator turns on in green, it represents that DND
function is enabled.
For DND settings, please scan QR code on the front cover, and
refer to the user’s manual.
Table 1-1
2
1.2 Rear Panel Port
1.2.1 VTH5221 Series /VTH5241 Series
VTH5221 series and VTH5241 series have different port positions at the rear panel, but the
same port provides the same function. Taking VTH5221 as an example, specific functions of
ports are introduced, as shown in Figure 1-1.
Figure 1-1
1.2.2 VTH5221E-H/VTH5221EW-H
Rear panel of VTH5221E-H/VTH5221EW-H is shown in Figure 1-2.
Figure 1-2
1.2.3 VTH15XX-S2 Series Type B/Type CH & VTH15XX Series
Type B/Type CH
In VTH15XX-S2 type CH series, different types of digital VTH have different port positions, but
the same port provides the same function. Taking VTH1550CH-S2 as an example, specific
functions of ports are introduced, as shown in 错误!未找到引用源。.
3
In VTH15XX-S2 type B series, different types of digital VTH have different port positions, but
the same port provides the same function. Taking VTH1560B-S2 as an example, specific
functions of ports are introduced, as shown in 错误!未找到引用源。.
In VTH15XX type CH series, different types of digital VTH have different port positions, but the
same port provides the same function. Taking VTH1550CH as an example, specific functions of
ports are introduced, as shown in 错误!未找到引用源。.
Figure 1-5
In VTH15XX type B series, different types of digital VTH have different port positions, but the
same port provides the same function. Taking VTH1560B as an example, specific functions of
ports are introduced, as shown in 错误!未找到引用源。.
Figure 1-6
4
1.2.4 VTH5222CH/VTH5222CHW-2
Except different numbers of 2-wire port, VTH5222CH and VTH5222CHW-2 are the same in
other aspects. VTH5222CH has 1 group of 2-wire port, while VTH1550CHW-2 has 3 groups of
2-wire port. VTH5222CH is shown in Figure 1-7.
Figure 1-7
1.2.5 VTH1660CH
Its ports are described in Figure 1-8.
Figure 1-8
1.2.6 VTH2221A/VTH2221A-S2
Its ports are described in Figure 1-9.
5
Figure 1-9
1.2.7 VTH2421FB/VTH2421FS
Its ports are described in Figure 1-9.
Figure 1-9
6
2 Installation and Debugging
2.1 Installation
Don’t install VTH in bad environment, such as condensation, high temperature, stained,
dusty, chemically corrosive and direct sunshine environment.
In case of abnormality after power on, please pull out network cable and cut off power
supply at once. Power on after troubleshooting.
Engineering installation and debugging shall be done by professional teams. Please don’t
dismantle or repair arbitrarily in case of device failure. Please contact after-sales
department.
It is suggested that installation height of device central point shall be 1.4cm1.6cm above
the ground.
2.1.1 Surface Installation
Directly install the device with a bracket onto a wall, which is suitable for all types of devices.
Take “VTH1550CH” for example.
Drill holes in the wall according to hole positions of the bracket. Step 1
Fix installation bracket directly onto the wall with screws. Step 2
Put the device into installation bracket from top down. Step 3
Figure 2-1
7
2.1.2 Installation with 86 Box
Install the device with 86 box, which is suitable for all types of devices. Take “VTH1560B/BW
for example.
Embed 86 box into a wall at a proper height. Step 1
Fix installation bracket onto 86 box with screws. Step 2
Put the device into installation bracket from top down. Step 3
Figure 2-2
2.1.3 Desktop Installation with Bracket
Install the device with bracket on the desktop, which only applies to handset VTH. Take
“VTH5221E-H” for example.
With two M3×6 cross recessed countersunk head screws, tighten the metal bracket Step 1
onto the top two nuts of desktop bracket.
Please connect wire by reference to Figure 1-2. Step 2
After wiring, guide the wire through wire outlet in the rear or at the bottom of desktop Step 3
bracket.
Put the handset VTH along slot at the top of metal bracket, and install it into the Step 4
bracket.
8
Figure 2-3
2.2 Debugging
Carry out debugging to ensure that the device can realize basic network access, call and
monitoring functions after installation. Before debugging, please check whether the following
work has been completed.
Check whether there is short circuit or open circuit. Power on the device only after the
circuit is confirmed to be normal.
IP and no. of every VTO and VTH have been planned.
Ensure deployment position of SIP server.
Please scan QR code on the cover for details.
Set VTO info and VTH info at WEB interface of every VTO, set VTH info, network info and VTO
info on every VTH, and thus realize video intercom function.
2.2.1 VTO Settings
VTO interfaces of different models might be different, and the actual interface shall prevail.
For the first time, please initialize and modify login password.
Please ensure that default IP addresses of PC and VTO are in the same network segment.
Default IP address of VTO is 192.168.1.110.
Power on the device, and enter default IP address of VTO at the address bar of PC Step 1
browser. The system displays “Device Init” interface, as shown in Figure 2-4.
9
Figure 2-4
According to interface prompt, enter “Password” and Confirm Password”, and click Step 2
“Next”. Select “Email” and enter your Email address. This Email address is used to
reset the password, so it is recommended that it should be set.
Enter default address in the browser to login WEB interface. Step 3
Default username is admin. Password is the new one set during initialization.
Select “Network Setting > Basic”. Step 4
The system displays “TCP/IP” interface, as shown in Figure 2-5.
Figure 2-5
Enter the planned “IP Address”, “Subnet Mask” and “Gateway”, and click “OK”. Step 5
After modification is completed, VTO reboots automatically, while the following two
cases occur at WEB interface.
If PC is in the planned network segment, WEB interface jumps to new IP login
interface automatically.
If PC is not in the planned network segment, login will be failed. Please add PC to
the planned network segment and login WEB interface again.
Login WEB interface again; select “Local Setting > Basic”. Step 6
The system displays “Device Propertiesinterface, as shown in Figure 2-6.
10
Figure 2-6
Select system type as “TCP/IP”. 1)
Click “OK” to save the settings. 2)
Reboot the device manually, or wait for auto reboot and put the settings into effect.
Login WEB interface again; select “Network Setting > SIP Server”. Step 7
The system displays “SIP Serverinterface, as shown in Figure 2-7.
Figure 2-7
Select server type. 1)
When this VTO or another VTO works as SIP server, select Server Type to
be “VTO”. It applies to a scenario where there is only one unit.
When the platform (Express/DSS) works as SIP server, select Server Type to
be Express/DSS. It applies to a scenario where there are multiple buildings or
multiple units.
Set VTO number and click OK to save config. 2)
When the platform works as SIP server, if it is necessary to set Building No.
and Building Unit No., please enable Support Building and Support Unit
and set them.
After VTO is set to be SIP server and configured, group call function will
appear at the interface. To realize group call, please select Enable after the
group call.
Select Network Setting > SIP Server. Step 8
The system displays “SIP Serverinterface, as shown in Figure 2-8.
11
Figure 2-8
This VTO works as SIP server.
Select SIP Server Enable, and click OK to save config. The VTO reboots
automatically.
Another VTO or platform works as SIP server.
Set parameters by reference to Table 2-1 and click OK. The VTO reboots
automatically.
Parameter
Description
IP Address
IP address of SIP server.
Port
It is 5060 by default when another VTO works as
SIP server.
It is 5080 by default when the platform works as
SIP server.
Username/Password
Use default value.
SIP Domain
It shall be VDP when another VTO works as SIP
server.
It can be null or keep default value when the
platform works as SIP server.
Login Username/
Password
Username and password to login SIP server.
Table 2-1
VTO settings have been completed if the platform or another VTO works as SIP
server.
If this VTO works as SIP server, VTO No. Management and Room No.
Management appears in the left parameter tab. Please add VTO and VTH by
reference to Step 9 and Step 10.
(Optional) Login WEB interface again; select Household Setting > VTO No. Step 9
Management”.
The system displays “VTO No. Management” interface, as shown in Figure 2-9.
12
Figure 2-9
Click Add, set outdoor station parameters by reference to Table 2-2 and click OK.
Repeat this step to add other outdoor stations in the group.
Parameter
Description
VTO No.
VTO number.
Register Password
Signaling interactive use in SIP system. Adopt default
value.
Build No.
Number of the building where VTO is located.
Unit No.
Number of the unit where VTO is located.
IP Address
IP address of VTO.
Username/Password
Username and password to login WEB interface of this
VTO.
Table 2-2
(Optional) Select “Household Setting > Room No. Management”. Step 10
The system displays “Room No. Management” interface, as shown in Figure 2-10.
When there are master VTH and extension, both shall be added.
Figure 2-10
Click Add, set VTH parameters by reference to Table 2-3 and click OK. Repeat
these steps to add other VTH in the group.
Parameter
Description
Family Name
Set VTH username and nickname, in order to distinguish.
First Name
Nick Name
13
Parameter
Description
Room No.
Set VTH room number.
VTH room number consists of 16 numbers, letters, or
their combinations. It shall be consistent with room
number configured at VTH.
When there are master VTH and extensions, to realize
group call function, master VTH short no. shall end with
#0”, whereas extension VTH short no. shall end with #1,
#2 and #3. For example, if master VTH is 101#0,
extensions will be 101#1, 101#2…
Register Type
Signaling interactive use in SIP system. Adopt default value.
Register Password
Table 2-3
2.2.2 VTH Settings
2.2.2.1 Initialization
For the first time, please initialize the password and bind Email. Password is used to enter
project setting interface, while Email is used to retrieve your password when you forget it.
Power on the device. Step 1
The system displays “Welcome” and enters “Initialization” interface, as shown in Figure
2-11.
14
Figure 2-11
Enter “Password”, “Confirm Pwd” and “Email”. Press [OK]. Step 2
Press [Setting] for more than 6 seconds, enter the password set during initialization, Step 3
and click [OK].
Click [Network]. Step 4
The system displays “Network” interface, as shown in Figure 2-12 or Figure 2-13.
IP addresses of VTH and VTO shall be in the same network segment. Otherwise, VTH
will fail to obtain VTO info after configuration.
Figure 2-12
Figure 2-13
LAN
15
Enter “Local IP”, “Subnet Mask” and “Gateway”, press [OK]. Or press to enable
DHCP function and obtain IP info automatically.
If the device has WLAN function, please click “WLAN” tab to set it.
WLAN
Press to enable Wi-Fi function. 1)
The system displays available Wi-Fi list, as shown in Figure 2-14.
Figure 2-14
Connect Wi-Fi. 2)
The system has 2 access ways as follows.
At “WLAN” interface, select Wi-Fi, click “Wireless IP” tab to enter “Local IP”,
“Subnet Mask” and “Gateway”, and press [OK].
At “WLAN” interface, select Wi-Fi, click Wireless IP” tab, press to
enable DHCP function and obtain IP info automatically.
To obtain IP info with DHCP function, use a router with DHCP function.
Press [VTH Config]. Step 5
The system displays “VTH Config” interface, as shown in Figure 2-15.
16
Figure 2-15
Be used as a master VTH.
Enter “Room No.” (such as 9901 or 101#0) and press “OK” to save.
“Room no.” shall be the same with “VTH Short No.”, which is set when adding
VTH at WEB interface. Otherwise, it will fail to connect VTO.
In case of extension VTH, room no. shall end with #0. Otherwise, it will fail to
connect VTO.
Be used as an extension VTH.
Press [Master] and switch to “Extension”. 1)
Enter “Room No.” (such as 101#1) and “Master IP” (IP address of master VTH). 2)
“Master Name” and “Master Pwd” are the user name and password of master VTH.
Default user name is admin, and the password is the one set during device
initialization.
Press [OK] to save settings. 3)
Press [SIP Server]. Step 6
The system displays “SIP Serverinterface, as shown in Figure 2-16.
17
Figure 2-16
Set parameters of SIP server by reference to Table 2-4. 1)
Parameter
Description
Server IP
When the platform works as SIP server, server IP is IP address
of the platform.
When VTO works as SIP server, server IP is IP address of the
VTO.
Network Port
When the platform works as SIP server, network port is 5080.
When VTO works as SIP server, network port is 5060.
User Name
Use default value.
Register Pwd
Domain
Registration domain of SIP server, which can be null.
When VTO works as SIP server, registration domain of SIP server
shall be VDP.
User Name
User name and password to login SIP server.
Login Pwd
Table 2-4
Set Enable Status to be . 2)
Enable SIP server function.
Press [OK] to save settings. 3)
Press [VTO Config]. Step 7
The system displays “VTO Config” interface, as shown in Figure 2-17.
18
Figure 2-17
Add VTO or fence station. Step 8
Add main VTO.
Enter Main VTO Name, VTO IP Address”, “User Name” and “Password”. 1)
Switch the “Enable Status” to be . 2)
“User Name” and “Password” shall be consistent with WEB login user name and
password of VTO. Otherwise, it will fail to connect.
Add sub VTO or fence station.
Enter Sub VTO/Fence Station Name, Sub VTO/Fence Station IP address, 1)
“User Name” and “Password”.
Switch the “Enable Status” to be . 2)
Press / to turn page and add more sub VTO/fence stations.
2.3 Debugging Verification
2.3.1 VTO Calls VTH
Dial VTH room no. (such as 101) at VTO, and thus call VTH. VTH pops up monitoring image
and operating keys, as shown in Figure 2-18. It represents successful debugging.
The following figure means that SD card has been inserted into VTH. If SD card is not inserted,
recording and snapshot icons are gray.
19
Figure 2-18
2.3.2 VTH Monitors VTO
VTH is able to monitor VTO, fence station or IPC. Take “VTO” for example.
Select “Monitor > Door”, as shown in Figure 2-19. Select the VTO to enter monitoring image, as
shown in Figure 2-20.
The following figure means that SD card has been inserted into VTH. If SD card is not inserted,
recording and snapshot icons are gray.
20
Figure 2-19
Figure 2-20
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dahua Digital VTH - v 4.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dahua Digital VTH - v 4.2 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info