780004
8
Zoom out
Zoom in
Previous page
1/16
Next page
07
Error Code icon
Error Code No. DESCRIPTION
2
Code
Code
3
Code
5
Code
4
Code
6
Code
8
Code
9
Excessive electric current is detected inside the controller, and a
protection mechanism is implemented.
Check whether the three-phase power cable terminal connector is
short-circuited.
If there is no short-circuit, restart it.
If this state still occurs, means the internal power device of the
controller is damaged.
The motor's three-phase power cable has fallen off, loosened, or
the motor has stopped operating for more than 2 seconds, or the
load is too heavy and the motor cannot operate normally, or the
power input isn’t connect properly.
If this state still occurs after restarting, it is the reason for the poor
connection of the three-phase wires of the motor.
The voltage of battery is excessively low; the battery is under
voltage protection.
This error code can detect whether the brake lever is damaged
under normal conditions.
The error code should disappear after the brake is released.
The power system detects whether the torque signal is faulty on the
system.
The electric circuit system detects whether the internal electric
current loop components of the controller are damaged, or the 5V
loop is short-circuited, and if there is, the status will be displayed.
The battery voltage needs to be checked at all times when the
circuit system is operating.
If the battery voltage is >43.5V, it means that high voltage
protection occurs, or the cable sequence of the sensor is
connected incorrectly, and the system will stop operating and
display this status.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dahon UNIO E20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dahon UNIO E20 in the language / languages: English as an attachment in your email.

The manual is 0.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info