43
PRECAUTIONS HOW TO ASSEMBLE
Before using, please make sure the network voltage coincides with the product rated voltage.
When in use, do not block or shelter the rear outlet cover to avoid influencing normal air
exhaustion. Otherwise, the motor will be damaged by overheat.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Keep the appliance away from stove or any other high temperature objects so as not to
influence its operation by deforming its plastic parts.
Do not bend, extrude or pull by the flexible hose, Stop using the broken or damaged
hose, instead to use the new hose.
When you need to clean or repair your appliance or stop operation, unplug from the
power outlet. When unpluging, be sure to hold the plug, but not pull or carry by the
power cord.
Never use the appliance without dust bag or when the dust bag is broken or not
assembled .
When sucking, do not suck up particles as mud, paste ,wall ashes, or sharp articles.
otherwise it may result in obstruction to the dust bag or air filter or damage to the motor.
If sucking up these particles, please immediately clean the dust bag and air flow filter.
When in use, do not suck up suck hair rolls, large paper rolls or plastic bags which may
easily lead to block the suction hole or suction tube or hose. Other wise it may cause
breakdown or deforming of body cover. If any block occur to the suction ,immediately
stop operation by unplugging from the outlet for cleaning.
When cleaning the appliance, wet cloth soaked with water or neutral detergent shall be
used instead of gasoline or banana water. Otherwise it may lead to breakage of
fadeness of the body cover.
Press the button on top of the
plastic suction tube head and
then push it in the direction of air
inlet hole till locked
When discharge the hose, press
the button on top of the plastic
suction tube head and then pull it
out towards you.
How to use connecting tubes and
curved wand?
When connecting, insert the
bigger end of the connecting tube
into air flow handle and then
swivel it to firm connection.
Connection of the tubes. Refer to
the above said.
Connection of connecting tube
with floor brush. For connection,
insert the smaller end of
connecting tube into the tube on
the floor brush, and then swivel it
to firm connection.
Regarding the connection of
connecting tubes with crevice
nozzle, refer to the above said.
