486292

Daewoo KOR-811Q Manual

18
Zoom out
Zoom in
Previous page
1/23
Next page
18
WEIGHT DEFROSTING AND COOKING IN TWO STAGES (CONTINUE)
6. Touch pad.
7. Touch
pads for the power level you want in
the second stage.
8. Touch the number pads for the
cooking time you want in the second
stage.
9. Touch pad.
When you touch START pad, the WEIGHT DEFROST, STAGE1 and STAGE2 indicators come on to
confirm the power levels selected. The WEIGHT DEFROST indicator starts blinking to show you that the
oven is in WEIGHT DEFROST mode. The display counts down the time remaining in WEIGHT
DEFROST mode. When the oven beeps, turn over, break a part and redistribute at a beep. At the end of
WEIGHT DEFROST mode, the oven will beep and start stage one. The WEIGHT DEFROST indicator
goes off and the STAGE 1 indicator starts blinking. The display counts down the time remaining in stage
one. At the end of stage one, the oven will beep and start stage two. The STAGE1 indicator goes off and
the STAGE2 indicator starts blinking. The display counts down the time remaining in stage two when
stage two ends, you will hear 3 beeps.
AUTO START
Auto start can be programmed for up to two cooking stages.
Auto start can not be programmed for auto defrost.
1. Program the desired power level and cooking time for food to be cooked.
2. Touch pad.
3. Enter the desired start time by
pressing the number.
4. Touch pad.
When you touch START pad, the present time appears in the display and the cooking program indicators
come on. The AUTO START indicator and the colon start blinking. When the selected start time arrive, the
oven begins operating and the oven light turns on. The AUTO START indicator goes off and the next stage
indicator begins to blink. When the cooking is completed you will hear 3 beeps. The oven turns off and the
present time appears in the display.
The STAGE2 indicator lights and "P-" is displayed.
The display will show what you touched.
The display will show the numbers you pressed in the order
you touched.
The AUTO START indicator lights and ":0" is displayed.
The display will show the numbers you press pads in the order
you touched.
NOTE: AUTO START can be used for time cooking, if the clock is set. If the oven door is opened after
programming AUTO START, it is necessary to touch the START pad for the time of day to
appear in the readout so that the oven will automatically begin programmed cooking at the
chosen AUTO START time. Before setting, check to make sure the clock is showing the correct
time of day.
1
4
7
2
5
8
0
3
6
9
START
START
Clock/
A.Start
Power
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo KOR-811Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo KOR-811Q in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info