486267

Daewoo KOR-128MOP Manual

12
Zoom out
Zoom in
Previous page
1/19
Next page
11
WEIGHT DEFROSTING AND COOKING IN TWO STAGES (CONTINUED)
When you touch START pad, the WEIGHT DEFROST, STAGE 1 and STAGE 2 indicators come on to
confirm the power levels selected. The WEIGHT DEFROST indicator starts blinking to show you that the
oven is in WEIGHT DEFROST mode. The display counts down the time remaining in WEIGHT
DEFROST mode.
When the oven beeps, turn over, break a part and or redistrtbute the food. At the end of WEIGHT
DEFROST mode, the oven will beep and start stage one. The WEIGHT DEFROST indicator goes off and
the STAGE 1 indicator starts blinking. The display counts down the time remaining in stage one.
At the end of stage one, the oven will beep and start stage two.
The STAGE 1 indicator goes off and the STAGE 2 indicator starts blinking. The display counts down the
time remaining in stage two when stage two ends, you will hear 3 beeps.
6. Touch POWER pad.
7. Touch the number pads for the power level you want in
the second stage.
8. Touch the number pads for the cooking time you want
in the second stage.
9. Touch START pad.
The STAGE 2 indicator lights and 'P-" is
displayed.
The display will show what you touched.
The display will show the numbers you
pressed in the order you touched.
When you touch START pad, the present time appears in the display and the cooking program indicators
come on. The AUTO START indicator and the colon start blinking. When the selected start time arrives
the oven begins operating and the oven light turns on. The AUTO START indicator goes off and the next
stage indicator begins to blink. When the cooking is completed you will hear 3 beeps. The oven turns off
and the present time appears in the display.
AUTO START
Auto start can be programmed for up to two cooking stages.
Auto start can be not be programmed for auto start.
1. Program the desired power level and cooking time for food to be cooked.
2. Touch CLOCK/A.START pad.
3. Enter the desired start time by pressing the number.
4. Touch START pad.
The AUTO START indicator lights and ":0"
is displayed.
The display will show the numbers you
pressed in the order you touched.
NOTE: AUTO START can be used for time cooking, if clock is set. If the oven door is opened after
programming AUTO START, it is necessary to touch the START pad for the time of day to
appear in the readout so that the oven will automatically begin programmed cooking at the
chosen AUTO START time.
Before setting, check to make sure the clock is showing the correct time of day.
POWER
CLOCK/
A.START
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo KOR-128MOP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo KOR-128MOP in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info