7 8
When the oven door is opened, the light turns
off.
The oven door can be opened at any time
during operation by touching the door release
button on the control panel. The oven will
automatically shut off. To restart the oven,
close the door and then touch START.
Each time a pad is touched, a BEEP will sound
to acknowledge the touch.
The oven automatically cooks on full power
unless set to a lower level.
The display will show ":0" when the oven is
plugged in.
Time clock returns to the present time when
the oven turns off.
When the STOP/CLEAR pad is touched during
the oven operation, the oven stops cooking and
all information retained.
To erase all information (except the present
time), touch the STOP/CLEAR pad once more.
If the oven door is opened during the oven
operation, all information is retained.
If the START pad is touched and the oven does
not operaate, check the area between the door
and door seal for obstructions and make sure
the door is closed securely.
The oven will not start cooking until the door is
completely closed or the program has been
reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a 230V AC 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
2
3
4
5
6
7
8
Make sure the oven is properly installed and
plugged into the electrical outlet.
Wattage output chart
• The power-level is set by pressing the POWER pad. The chart shows the display, the power level and
the percentage of power.
Power Level (Display) Approximate Percentage of Power
Touch POWER pad,
Once the Touch
POWER P-HI 100%
9 P-90 90%
8 P-80 80%
7 P-70 70%
6 P-60 60%
5 P-50 50%
4 P-40 40%
3 P-30 30%
2 P-20 20%
1 P-10 10%
0 P-0 0%
CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will flash ":0" and a beep will sound. If the AC power
ever goes off, the display will flash ":0" when the power comes back on.
1. Touch CLOCK/A.START pad.
This is a 12 hour clock system.
2. Touch CLOCK/A.START pad
once more.
3. Enter the correct time of day by touching the numbers
in sequence.
4. Touch CLOCK/A.START pad.
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will
sound. Touch the CLOCK/A.START pad and re-enter the time.
The display will stop blinking, and the colon
start blinking. If you selected 12 hour clock
system, this digital clock allows you to set
from 1:00 to 12:59. If you selected 24 hour
clock system, this digital clock allows you to
set from 0:00 to 23:59.
WEIGHT DEFROSTING
WEIGHT DEFROST lets you easily defrost food by eliminating guesswork in determining defrosting
time. The minimum weight for WEIGHT DEFROST is 0.5 pounds. The maximum weight for
WEIGHT DEFROST is 6.5 pounds. Follow the steps below for easy defrosting.
The defrosting time is automatically determined by weight entered.
The g indicator goes off and the weight defrost indicator blinks and the defrosting time counts down
turned or rearranged. When the defrosting time ends, you will hear 3 beeps.
NOTE: This oven is multiple clock
system. If you want 12 hour
clock system, can be omitted this
step. (step2)
1. Touch AUTO DEFROST pad.
2. Touch number pads for the desired defrosting weight
want.
3. Touch START pad.
The WEIGHT DEFROST indicator lights
and "0" is displayed and the g indicator
starts blinking.
The display will show the numbers you
pressed in the order you touched.
WEIGHT DEFROST begins.
CLOCK/
A.START
CLOCK/
A.START
AUTO
DEFROST
