Press Power button Power level (Display) Approximate Percentage of Power
once P-HI 100%
twice P-80 80%
3 times P-60 60%
4 times P-40 40%
5 times P-20 20%
9
The oven light turns on while the oven is
working.
The oven door can be opened at any time
during operation. The oven will automatically
shut off.
Each time a button is pressed, a BEEP will
sound to acknowledge the press.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “ : 0” when the oven is
plugged in and its door is open.
When the Stop/Clear button is pressed during
the oven operation, the oven stops cooking and
all information retained. To erase all information
press the Stop/Clear button once more. If the
oven door is opened during the oven operation,
all information is retained.
If the Start button is pressed and the oven does
not operate, check the area between the door
and door seal for obstructions and make sure the
door is closed securely. The oven will not start
cooking until the door is completely closed or the
program has been reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a 230V 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
4. Set required programme and time, then press Start.
5. Once cooking is complete take care removing container as it will be hot.
1
2
3
4
5
6
7
Make sure the oven is properly installed
and plugged into the electrical outlet.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the Power button. The chart shows the display, the power level and
the percentage of power.
