561969
13
Zoom out
Zoom in
Previous page
1/16
Next page
Customizing the Function Settings
Press DISPLAY while the disc is stopped or playback.
Each time you press DISPLAY, the on-screen display on the TV screen changes as follows.
25
You can view information about a disc and its operational status on the TV screen.
Checking the Total Number of the Titles/Tracks, Current Title/Chapter/Track, Remaining
and Elapsed Time, etc.
In case of VIDEO CD
In case of MP3 CD
Using information on the On-Screen display
24
1. Press LANGUAGE during playback.
The audio setting is displayed for about 3
seconds.
Selecting a Playback Audio Setting
You can select the preferred audio language and sound
system as a set from those included on the DVD video.
This function lets you temporarily change the audio
language which you selected as the automatic setting in
the setting menu, and choose the sound system if the DVD
video is recorded in more than one sound format.
: [ 1 ENGLISH D 5.1CH
: [ 1 ENGLISH D 5.1CH
: [ 2 ENGLISH PCM 2CH
: [ 3 KOREA D 5.1CH
About recording systems
This machine uses the Dolby Digital and PCM systems and
cannot play DVD videos recorded in any other sound
system.
Notes
Some discs allow you to change audio selections only by using
the disc menu. If this is the case, press MENU and choose the
appropriate language from the selections in the disc menu.
Some discs may have only one audio language and sound
recording system set and you cannot change this selection.
The “Audio Language” setting in the setting menu is for automatic
selection of the audio language among those included on the
DVD video when the DVD is inserted.
Therefore, the selection in this section will not change the setting
of “Audio Language” in the setting menu. (Occasionally, the audio
language and sound system are selected by the disc.)
A Video CD may left and right channels which contain
sounds or languages on each channel. You can switch
these two channels to hear a preferred sound or language.
CHANNEL : [STEREO]
CHANNEL : [MONO L]
CHANNEL : [MONO R]
CHANNEL : [AUTO L]
CHANNEL : [AUTO R]
Selecting Sound Channels
Note
Dolby Digital 5.1 Channel sound may be displayed as “ D
5.1”.
Selecting the Audio Language/Sound Included on the Disc
Additional Operation
TT 01/03 CH 007/032 00:03:52
1/5 ENG D 5.1CH 1/5 ENG OFF
2. Press LANGUAGE.
Each time you press LANGUAGE, the
language and audio recording system set
changes.
In case of VIDEO CD/AUDIO CD
TRK 4/4 PBC 00:03:52
VCD
TRK 2/14 00:01:12
C D
TT 01/03 CH 007/032 00:03:52
In case of DVD video
Selecting a Setting
When you insert a DVD Video, VIDEO CD, the various functions of the machine will be set (reset) according to the setting
menu. You can customize this setting menu according to your preference.
The setting menu asks you to select a setting category from among SYSTEM, LANGUAGE, AUDIO, VIDEO, SPEAKER, and
DIGITAL. Each selected setup menu will provide you with setting details.
1. Press SETUP button while the disc is stopped.
The on-screen display appears.
2. Press
◀/▶
button to select the setup page.
3. Press
▲/▼
to select the setting menu and then
press
button to move selected item.
4. Press
▲/▼
to select the setting item, then
press ENTER button to confirm.
In case of the password setup menu.
Press
▲/▼/◀/
and ENTER to set 4 digits
password number.
Repeat 2 ~ 6 steps to select your desired setting.
5. To finish the setup, Press SETUP button or
press ENTER button after select EXIT SETUP .
During playback, press R/L (repeatedly) to
select the sound channel.
DVD videos that have the mark are recorded using this format.
DOLBY DIGITAL Surround
This 5.1-channel digital surround format lets you individually play
five full-range (20Hz-20kHz) channels (left and right front, center,
two surround channels) plus an LFE(Low Frequency Effect)
channel for the low-range effect sound.
It creates a realistic sound like that heard in theaters and concert
halls.
DSP(Digital Signal Processor)
Press DPLII MODE button repeatedly until
the desired DSP mode appears in the
machine's display.
The DSP indicator lights up when one of the
DSP modes is selected. Each press of the
button changes the DSP mode as follows:
Ex) STEREO
MUSIC(PRO LOGIC II)
MOVIE(PRO LOGIC II)
STEREO
Note : DOLBY PRO LOGIC II Surround
Dolby Pro Logic II creates five full-bandwidth output
channels from two-channel sources.
This is done using an advanced, high purity matrix
surround decoder that extracts the spatial properties of the
original recording without adding any new sounds or tonal
colorations.
The machine automatically detects the sound system when
DOLBY DIGITAL Surround is played back.
While playing back sources other than DOLBY DIGITAL
Surround sounds, you can select the desired DSP mode.
LANGUAGE SETUP PAGE
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
DIVX[R] VOD
EXIT SETUP
AUDIO SETUP PAGE
AUDIO SETUP
AUDIO OUT
MIC SETUP
PROLOGIC
KEY
ECHO
MIC VOL
EXIT SETUP
VIDEO SETUP PAGE
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
SPEAKER SETUP PAGE
SPEAKER SETUP
DOWNMIX
SUBWOOFER
CENTER DELAY
REAR DELAY
FRONT
CENTER
REAR
EXIT SETUP
SYSTEM SETUP PAGE
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
DIGITAL SETUP PAGE
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
Note :
The setup menu is available only for a DVD function.
Some of the item can be changed while a disc isplaying.
Retry while a disc stop, no disc or tray open mode.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo HC-6120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo HC-6120 in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info