1340
24
Zoom out
Zoom in
Previous page
1/26
Next page
Troubleshooting
Your Emerson television is designed to give you trouble-free performance for many
years. If you have a problem with your TV, try the solutions listed below.
If the suggestions listed below do not solve your problem, contact your Emerson Radio
Corp. dealer or an authorized Emerson service center. You can also call Emerson
directly at 1-888-508-2627.
There is no picture or sound, or the TV won't turn on.
¥ Make sure the TV is plugged in.
¥ Make sure the MUTE is not set.
¥ Make sure the power is on.
¥ If there is neither picture or sound, unplug the TV for 30 seconds, then plug it in
and try again.
There is no picture or sound on some UHF channels.
¥ Try another station. If the other stations are OK, it may be a station problem.
¥ Check that the antenna is connected, is in good working order, has no broken wires,
and is adjusted correctly.
¥ See if anything is interfering with the antenna signal.
¥ Make sure the AIR/CABLE setting is correct.
The sound is OK, but the picture is poor.
¥ Try another station. If the other stations are OK, it may be a station problem.
¥ Check that the antenna is connected and is in good working order, has no broken
wires, and is adjusted correctly.
The picture is OK, but the sound is poor.
¥ Try another station. If the other stations are OK, it may be a station problem.
¥ Check that the antenna is connected, is in good working order, has no broken wires,
and adjusted correctly.
There is poor reception on some channels.
¥ Try another station. If the other stations are OK, it may be a station problem.
¥ Check that the antenna is connected, is in good working order, has no broken wires,
and is adjusted correctly.
You cannot tune to a cable channel.
¥ Make sure the AIR/CABLE setting is correct.
¥ The channel may not be programmed into memory.
The picture rolls, slants, shows lines, is grainy, has poor color, or has
ghosts.
¥ Try another station. If the other station are OK, it may be a station problem.
¥ Check that the antenna is connected, is in good working order, has no broken wires,
and is adjusted correctly.
¥ See of anything is interfering with the antenna signal.
The remote control does not work.
¥ Make sure the TV is plugged in.
¥ Make sure there are fresh batteries in the remote control.
¥ Make sure there is nothing blocking the remote control signal.
21
Chapter 6 :
Troubleshooting
CHAPTER
6
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo ET13P2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo ET13P2 in the language / languages: Dutch as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info