Manual Daewoo erf 364 m (page 5 of 15) (English)

340672

5

Zoom out

Zoom in

Previous page

1/15

Next page

4

- Should the mains lead ever require a replacement, it is

essential that this operation be carried out by a qualified

electrician and should only be replaced with a flexible

cord obtained from the manufacturer.

- After replacement of a fuse in the plug, the fuse cover

must be refitted. If the fuse cover is lost a replacement

cover must be obtained. The colour of the correct

replacement fuse cover is that of the coloured insert in the

base of the plug or the colour that is embossed in words

in the base of the plug recess or elsewhere on the plug.

Always state this colour when ordering a replacement fuse

cover.

- Only 13 amp. replacement fuses which are ASTA

approved to BS 1362 should be fitted.

4. Check the rating plate (8) for voltage information.

5. The socket should be easily accessible and not directly

behind the appliance.

6. Electrical connections must be made in accordance with

local regulations. The appliance must be earthed as described

by law (connected through a properly earthed plug and

socket). The manufacturer rejects all liability for injury to

persons and animals or damage to property resulting from

failure to comply with this requirement.

7. A 10A fuse or one of a higher value must be used in the

socket circuit.

8. If the appliance plug and the wall socket are incompatible,

the socket must be replaced by a qualified electrician.

9. If the supply cord is damaged, it must be replaced by the

m a n u f a c t u rer or his service agent or a similarly qualified

p e r s o n in order to avoid hazard.

10. Do not use extension leads or multiple adapters, etc.

11. In some countries a plug has to be fitted. Make sure that the

installation and electrical connections are performed by a

qualified technician in compliance with the manufacturer’s

instructions and current local safety regulations. The wires in

the mains lead are coloured in accordance with the following

code:

- green/yellow = earth

- blue = neutral

- brown = live.

DISCONNECTION

Note: does not apply in the UK.

Electrical disconnection: remove the plug from the mains, or (if

applicable) disconnect the two-pole circuit breaker upstream

from the socket.

PROTECTING THE ENVIRONMENT

- The packaging may be completely recycled, as confirmed by

the recycling symbol; follow local disposal regulations.

- The appliance is manufactured from reusable materials.

- When you decide to scrap this product, please check the

cable to be disconnected from the mains. Then cut off the

cable and dispose of the product according to local waste

disposal laws.

- This product is free of CFC’s (cooling circuit contains R134a

or R-600a). Check the compressor label on the rear of the

appliance or the rating label inside the fridge to see which

refrigerant is used for your re f r i g e r a t o r.

English

Check for damages and correct

closing of the doors.

Not in the vicinity of a heat source.

Keep room dry and well ventilated. Keep more than 5cm distance space

at the top for ventilation.

Clean interior with a damp cloth. Best room temperature range -

+16°C to +32°C.

IMPORTANT

1. Although this product was carefully checked before

packing, please check the product:

- for damage;

- for correct closing of the doors.

Complaints must be reported to your retailer within 24

hours of delivery.

2. Installation instructions (7 drawings below).

3. Keep potentially hazardous packing materials (plastic

bags, etc.) out of reach of children to prevent the risk

of trapping

and suffocation.

Wait 2 hours before connecting to the

mains.

1

We have an ERF364.. fridge freezer . We don't know how old it is. Its started leaking so that there is a puddle on the floor in front oi the machine which we usually see in the morning . Grateful for any advice what to check and any way to fix the problem]
Thanks
Margaret Goodman Submitted on 10-11-2022 at 14:10
Reply Report abuse
- We are having the exact same problem, so if there is any help out there it’ll be so helpful…
  
  Thanks
  
  Nick Answered on 22-11-2022 at 15:57
  Vote up Report abuse
- Margaret,
  I have resolved our problem, it may be the same cause as yours.
  Behind the unit, at the bottom, you have a driptray sitting above the compressor motor. There is a drain which comes from the unit which allows the unit to drop into the tray while on defrost. I found ours was blocked, I removed the block and so far we’ve not had any problems.
  Hope this is of help.
  
  Nick. Answered on 24-11-2022 at 18:45
  Vote up Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Daewoo erf 364 m at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo erf 364 m in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info