Manual Daewoo DWS-62 (page 11 of 29) (English, French, Portuguese, Spanish)

517523

Zoom out

Zoom in

1/29

ENG

Front view Back view

RCC Mode start RCC Received

WIRELESS REMOTE SENSOR REGISTRATION PROCEDURE

1. Insert 3 pieces of AA batteries  rst to the main unit. The temperature display shows - - . – while

the wave icon will keep blinking for 2 minutes indicate the main unit is in sensor searching mode.

2. In a second step, insert the 2 pieces of AA batteries into the sensor unit. The LED on the front

panel will start  ashing at a rate of one time per around 2 seconds indicates channel-1 is in use.

3. While the LED is  ashing, press once the [CH] key will change the sensor channel setting to 2.

Keep toggle on [CH] key can change channel setting up to 3. The LED is blinking at a frequency to

indicate the channel setting. i.e. continuous blinks 2 times indicate channel-2 is selected.

Note: If user does not press any key for 10 seconds, it will exit the channel setting mode and

transmit the RF signal. The main unit will register the temperature reading.

REMOTE CHANNEL AUTO-SCROLLING

This device is equipped with an auto-scroll function. While the auto-scroll function is set, the

unit will automatically cycle to display the temperature and humidity of each remote sensor for

6 seconds.

1. To retrieve manually the speci c sensor temperature and humidity reading, press CHANNEL key

until desired channel number is displayed.

2. To enable auto-scroll function, use CHANNEL button to toggle channel 1, 2 or 3 until auto scroll

icon appears on the left hand side of the second line display.

DCF 77 RADIO CONTROLLED CLOCK

The radio-controlled time is calculated by the Cesium Atomic clock of Braunschweig (o cial clock

of Germany).

Then the time is coded and transmitted from Main ingen - near Frankfurt - via a signal on DCF-77

(77.5 kHz). The transmitting range of the signal is 500 km, which means that most of Western and

Central Europe is covered by this signal. Within this range the received time is completely accurate.

Once sensor signal(s) are received, the wave icon will  ash to indicate that the receiving unit starts

to receive the DCF radio controlled time signal.

Once the time signal is received, the wave icon will stay on the LCD, and time and calendar will

automatically be updated.

Note: During the 10-minute time signal reception, all manual settings will be suspended. If

setting is desired, press once [ ] key to deactivate the reception. You can also press and

hold the same key for 3 seconds to manually activate the reception in normal mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo DWS-62 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Daewoo DWS-62 Manual

Product: