611841
8
Zoom out
Zoom in
Previous page
1/31
Next page
8
vibrations, they should tighten by the ring nut
and/or nut on the foot until it locks as shown in
It is good to avoid, at any case, placing under
or around to the machine cardboard, wood
or similar materials, so as not to obstruct the
passage of air.
INSTALLATION UNDER A WORK TOP
The positioning of the machine under a
work top, can only happen if the housing
compartment has the following dimensions of
width of 76cm and of height of 85cm. It should
a sdeen enihcam eht taht deredisnoc eb osla
approximately 5cm behind from the wall. An
example of a typical installation is shown in the
illustration below. The superior cover (TOP) of
the machine must not be removed for reasons
of electrical and mechanical safety.
Figure 4
WATER SUPPLY CONNECTION
The water inlet hose must be connected to a
tap of cold water with a 3/4” threaded mouth.
Use only the supplied water inlet hose, avoiding
the use of old hoses, or hoses used previously.
N.B. the hose is already complete with
rubber gasket, if this is missing, the tube
must not be used.
If the water supply system is new or has been
inactive for too long, it will be necessary to
allow the water run until the water appears
clear before connecting the hose.
Figure 5
DWD-M_DWD-FI.indd 8 2015-05-27 오전 10:39:07
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo DWD-MI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo DWD-MI in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info