16
* WOOL PROGRAM
Note
• If you want to change the setting during operation, press the Start/Pause button to hold the operation and
press the button you want.
• Only ‘Cold’ washing temperature is selectable with Wool program.
• 1000rpm of spin velocity is NOT selectable with Wool program in order to protect damage on laundry.
• Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Wool program.
• The appropriate amount of laundry for Wool program is below 1.0kg.
• Use only special detergent for wool.
(Since special neutral detergent for wool creates a lot of bubbles, use appropriate amount).
Put the laundry in the drum. Put detergent and softener into the detergent case. Then
close the door.
•
Put detergent into the main wash and prewash compartments in the detergent
case. Softener should be below the ‘MAX’ level.
•
Put detergent into the pre wash compartment only if you want to add prewash.
•
When you want to use bleach, put it into the main wash compartment with
detergent.
Press the Power button.
•
The LED shows only ‘---’ and all Program Lights turn on.
1
2
Select the ‘Wool’ program using program selection dial.
•
Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘2’ times are selected
automatically.
•
If you want to change the spin velocity or add wash options (Rinse+, Crease Care),
press each button.
3
Press Start/Pause button.
•
The Door is locked. By sensing the weight of laundry and supplying wash water,
The appliance starts washing.
4