16
* WOOL PROGRAM
Note
• If you want to change the setting during operation, press the Start/Hold button to hold the operation
and press the button you want.
• Only the ‘Cold’, ‘30’°C and ‘40’°C water temperature is available with the Wool programme.
• 1000rpm and 1400rpm of spin velocity is NOT selectable with the Wool programme in order to
protect the clothing from damage.
• Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with this programme.
• The appropriate amount of laundry for the Wool programme is below 1.0kg.
• Use only special detergent for wool.
(Do not use more than the recommended amount of detergent for woollens as this may lead to too
much lather in the wash.)
Put the laundry in the drum.
Then close the door.
•
In the detergent compartment, put the powder into the main wash section.
Softener should be poured into the middle section of the compartment and be
below the ‘MAX’ level.
•
Put detergent into the pre wash compartment only if you want to add prewash.
•
When you want to use bleach, put it into the main wash compartment with
detergent.
Press the Power button.
•
The LED shows only ‘---’ and all Program Lights turn on.
Select the ‘Wool’ programme using the programme selection dial.
• Water
temperature ‘Cold’, spin ‘400’ rpm and rinse ‘2’ times are selected
automatically.
•
If you want to change the spin velocity or add wash options (Rinse+, Crease Care),
press each button.
Press Start/Hold button.
•
The washing machine will start operating by locking the door and supplying water.
1
2
3
4
