149786
15
Zoom out
Zoom in
Previous page
1/27
Next page
FEATURES
FEATURES
CHILD LOCK OFF
WAKE TIME OFF
WAKE PROG. D 999
CLOCK - - : - -
ZOOM AUTO 16 : 9
LANGUAGE
SOFTWARE UPDATE
▲▼ Position ◄► ON / OFF
MENU Exit
NEW SOFTWARE FOUND
PRESS OK TO UPDATE
OR MENU TO EXIT
SYSTEM SOFTWARE UPDATE IN PROGRESS
0% 100%
TOTAL UDPDATE TIME WILL BE APPROXIMATELY
10 MINUTES.
TO CANCEL THE UPDATE, PUSH THE RED BUTTON
ON THE REMOTE CONTROL.
Upgrade message when your TV Download processing if you select ok
find a newer version of software to update.
13
1. When switched to ON:
Prevents the use of the TV set without remote
control
2. Wake up function
This function is only selectable when the clock
is set. The TV set turns on from stand-by at the
WAKE TIME with the programme entered on the
WAKE PROG. line. Put the TV set on stand-by
with the remote control. When TV set turns on by
wake up function, it will be turned off if no touch
to TV set within 3 hours after TV turned on.
3. Shared with WAKE TIME.
4. TV clock setting
This function allows user to enter the time
manually. This will disable automatic clock drift
correction.
Note : If you turn off the set with the main power
button, the clock setting is lost. The clock will
be automatically set again if you watch a digital
program.
5. This function is only selectable when the default
picture format is currently active (see also
FORMAT SELECTION, AUTO setting, page 9). This
selects the default format to be used only when
the format selected with the ZOOM button (A18)
is AUTO, and no picture format signalling data
is received.
FEATURES MENU
See section near the end of section DAILY USE for a more detailed explanation of these functions.
1. Adjust this value ON or OFF.
- In stand-by mode, the stand-by indicator flashes
red and green to indicate the CHILD LOCK is set.
- The front panel TV buttons (B4, B5, B8, B8)
become inactive and the TV will only respond to
the remote control.
2. Switch the WAKE UP function OFF or ’ON’ (the
time will be shown e.g. 07:15) with the remote
control CURSOR LEFT (A12) /RIGHT (A12) buttons
- Enter the wake up time with the remote control
0...9 NUMBER (A6) buttons.
3. Adjust TV turn-on program number
D: Digital chanel
A: Analog chanel
To change digital <--> analogue,
press D/A button.
4. Adjust TV clock. Clock will start at 0 seconds
upon entry of the 4th figure.
5.
Choose your preferred default format with the
remote control CURSOR LEFT (A12) /RIGHT (A12)
buttons.
Note : For 4:3 TVs FULL SCREEN is represented
by 4:3. For 16:9 TVs FULL SCREEN is repre-
sented by 16:9.
6. Change language to English, Welsh, Gaelic.
7. Occasionally, a newer version of software may become availiable. This function is for manual update.
Press OK key to initiate download. If you want to stop the process, you can press MENU key. You must not turn off
the TV while downloading is in progress, as errors could occur. This menu is only activated on digital mode.
* For an automatic searching a new software, your TV checks transport stream of the DVB-T broadcast once a day
when turning off the TV pressing power button (A1) on the remote control. The picture is off but power is supplied
during searching. The TV will go to stand-by mode after finishing search. This progress takes a few minutes.
If the TV find a newer version of software, a update message may be shown when you turn on your TV.
Press OK key to initiate download.
Press MENU key to ignore it.
It you don’t want the TV to search a new software when turning off the TV by remote control, keep pressing power
button (A1) about 2~3 sec.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo dub 2850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo dub 2850 in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info