149786
8
Zoom out
Zoom in
Previous page
1/27
Next page
Remark: The side S-VIDEO jack (B9) and the VIDEO socket (B10) does not connect at the same time.
6
CONNECTING EXTERNAL EQUIPMENT
The rear Scart1 (C1), Scart2 (C2) sockets, the front AV socket (B10) (B11 and B12), and the S-VHS socket (B9) are three dedicated sockets to
connect audio-video equipment.
Rear
REAR SCART 1 SOCKET (AV1)
This socket (C1) has video / audio inputs and outputs. When the TV set is in
analogue mode, output is RF analogue signal. It is recommended to connect to
this socket automatic AV switching equipment such as video games, DVD players
and most VCR’s.
In most cases, when connecting powered equipment to this socket, the TV
set switches automatically to AV mode. If not, then use the TV/AV buttons
(A4) or (B8) to select AV1.
REAR SCART 2 SOCKET (AV2)
This socket (C2) has video / audio inputs and outputs. The signal output is a
monitor of the picture displayed on a screen and RF digital signal. Automatic AV
switching equipment(for example most VCR’s) can be connected to this socket.
In most cases, when connecting powered equipment to this socket, the TV
set switches automatically to AV mode. If not, then use the TV/AV buttons
(A4) or (B8) to select AV2.
You can also receive an S-VHS signal with REAR SCART2 socket, by
selecting SVHS2 with the TV / AV buttons (A4) or (B8).
REAR RCA JACK
This jack (C5) has SPDIF out in digital mode and audio L/R outputs.
VCR / DVD / Video Game
Important: If your video equipment does not have SCART socket(s),
or if you wish to use only the aerial (RF) connection (not
recommended), then you should make use of PR 00 on the
TV set for best performance.
TV/AV SELECTION
Allows to switch between TV and external modes.
By repeatedly pressing the remote control TV / AV (A4) or the TV front panel TV /
AV (B8) button, the on-screen display is changed as shown (SVHS3 is an option):
AV1
AV2 SVHS2 AV3 SVHS3 TV
Remark: If the signal source from the rear SCART1 socket (AV1) is RGB
(e.g. normally from a DVD player) then AV1 RGB will be displayed.
SIDE AV SOCKET (AV3)
The side AV socket (B10) - (B11) and
B12) has audio and video inputs. To
switch from TV to these inputs,
use the TV / AV buttons (A4) or
(B8) and select AV3.
SIDE S-VIDEO JACK
The side S-VIDEO jack (B9) has video inputs only.
It is necessary to connect the audio inputs to socket (B11 and
B12) in order to have audio and video. To switch from TV to
these inputs, use the TV / AV buttons (A4) or (B8) and
select SVHS3.
Side
CAMCORDER
OR
VIDEO GAME
HEADPHONE SOCKET
To hear TV sound with
headphones, insert a
3.5mm headphone plug
into the headphone
socket (B13). The
speaker’s sound will be
automatically cut off.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo dub 2850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo dub 2850 in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info