Chapter 2 : Connecting an Antenna or Cable to Your TV
Your TV will provide you with the best performance if you connect it to an external
antenna or cable system. Follow the directions below make this connection. Please note
that you will normally only have to make one of the connections shown below, not all of
them.
All connections will be made to the antenna terminal on the back of your TV. The anten-
na terminal is a silver metal post partially surrounded by two plastic tabs. For help in
locating the antenna terminal, see “Your TV's Back Panel” on page 4.
There is no rod antenna (“rabbit ears”) provided with your TV.
Connecting an Antenna
If your antenna ends in a single coaxial
lead, simply press or screw the cable onto the
antenna terminal on the back of your TV.
If your antenna ends in a pair of 300 ohm twin leads, you must use a 300-ohm/75-
ohm adaptor. Place the leads underneath the screws on the adaptor, tighten the screws,
then press the adaptor onto the antenna terminal on the back of the TV.
7
CHAPTER
2
Connecting an Antenna or Cable to Your TV