Connection is not necessary in Mono mode.
Connect either S-Video or Video input to the unit. When both are
connected, the output display will be in S-Video.
Note
The stated connection does not comply with recording TV programs. You must make the connection to the Antenna
input socket as shown below for recording.
1. Connect the antenna to the antenna input of the video
2. Make a connection of Antenna Output on Video and Antenna Input on TV with the coaxial cable provided.
1. Adjust the channel selection switch at the rear side of the Video to 3 or 4.
2. Turn on the TV set, and adjust the channel to 3 or 4, to the number adjusted for step1.
3. Turn on the Video, insert the videocassette, and press the
Play button.
Operating Instructions
Connection Guide
Connecting with an External Source
You may connect S-Video input to enjoy a clearer and brighter picture images. You can choose and make the
connection with any one of Video 1,2, or 3 inputs.