133662
11
Zoom out
Zoom in
Previous page
1/31
Next page
10
1. Remove the screw holding on the connection cover.
Remove the connection cover on the outdoor unit to
access the connection area.
3. Connect the wires to the housing and terminals on the
control board individually as the following.
INSTALLING THE INDOOR/OUTDOOR WIRE TO THE OUTDOOR UNIT FOR AC CONNECTION
The Indoor/Outdoor wire is used to supply AC from the Indoor unit to the Outdoor unit. To install the indoor/outdoor wire,
follow the procedures below.
2. Route the indoor/outdoor wire into the opening on the
outdoor unit and through the wire holder. To connect
to the wire holder, loosen the screw on the wire hold-
er, insert the wires through, then tighten the screw.
Housing & Terminals on the
outdoor unit
Housing B
GRAY
color of wires
color of wires
BLACK/GRAY
GRAYBLACK/GRAY
Housing A
Black BlueBlue Brown
Yellow/
Green
Red
Black Blue
Blue Brown
Yellow/
Green
Red
Terminals
1 2L
L N 1 2Y
N Y
Terminals
Housing & Terminals on the
indoor unit
Main PCB TerminalsTerminals
NOTES:
Make sure the Indoor unit’s AC cord is not connected
to AC power when connecting the indoor/outdoor wire.
When connecting wires, make sure they are fully
inserted and minimum copper wire is exposed. If they
are not, shorting, overheating, no operation, etc. may
occur.
Be sure to comply with local codes on running a wire
from the indoor to the outdoor unit.
4. Connect the Black wire to the “1” connection, Blue
wire to the “2” connection. Connect the Blue wire to “L”
connection, Brown wire to the “N” connection, the
Yellow / Green wire to the “G” connection and the Red
wire to the “ ” connection. Insert Housing A and
Housing B to connection.
The used connection cable connected to indoor and ou
door unit must be ;
1) H07RN-F 4G1.5mm
2
(NOT INCLUDED)
2) H07RN-F 2G1.5mm
2
(NOT INCLUDED)
3) UL2464 AWG22 2G0.75mm
2
(INCLUDED IN SET)
Red
Black
Yellow/Green Blue
Brown
Housing
A
Housing
B
L
N
1Y
2
Blue
1)
2)
3)
Connection
Cable Cover
Clamp Cord
<OUTDOOR UNIT(Control Panel)>
Connection
Cover
Connection
Cover
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo dsb 181 lh at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo dsb 181 lh in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info