561953
56
Zoom out
Zoom in
Previous page
1/58
Next page
REFERENCE
55
Troubleshooting
Symptom Cause Solution
RESET :
If the set is in malfunctions, unplug the power cord, and then plug it in after 5 seconds. As this set is a Digital
Multimedia Product, malfunction may occur.
Finalise the disc; see page 30.
No solution.
No solution.
Use another disc.
You cannot record the source.
Select the channel on the DVD Recorder +
VCR’s built-in TV tuner.
Set clock to correct time. See ‘Set Clock‘ on
page 22.
Reprogram Timer. See ‘Timer Recording‘ on
page 46~48.
Reprogram Timer.
No solution.
No solution.
Make A/V connections. Stereo is available
only via A/V output from DVD Recorder +
VCR.
Select AUX or A/V source as TV input.
Set TV audio channel mode to Stereo.
See ‘Changing the TV Audio Channel‘ on
page 34.
Point the remote control at the remote
sensor of the DVD Recorder + VCR.
Operate the remote control within 23 ft (7m).
Remove the obstacle.
Replace the batteries.
The disc was not finalised (or not made
compatible if using a DVD+RW).
Some players will not play even a
finalised disc.
Discs recorded with copy-once material
cannot be played on other players.
The remaining blank space on the disc
is insufficient.
The source you are trying to record is
copy-protected.
When setting the recording channel, the
channel is tuned on your TV’s tuner.
Clock in DVD Recorder + VCR is not
set to correct time.
Timer has been programmed
incorrectly.
TIMER indicator light does not appear
after programming timer.
TV is not Stereo-compatible.
Broadcast program is not in stereo
format.
DVD Recorder + VCR A/V Out jacks
are not connected to TV A/V In jacks.
DVD Recorder + VCR Audio/Video Out
is not selected for viewing at the TV.
DVD Recorder + VCR’s TV audio
channel is set to BIL or MONO.
The remote control is not pointed at the
remote sensor of the DVD Recorder +
VCR.
The remote control is too far from the
DVD Recorder + VCR.
There is an obstacle in the path of the
remote control and the DVD Recorder +
VCR.
The batteries in the remote control are
dead.
Can’t play disc recorded
on this DVD Recorder +
VCR on another DVD
player.
Cannot record or did not
record successfully.
Timer Recording not
possible.
Stereo Audio Record
and/or Playback not
present.
Remote control does not
work properly.
DF-H3512P-UL¿ 2008.1.25 5:21 PM ˘ ` 55 mac001 1200DPI 100LPI
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo DRV-6700P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo DRV-6700P in the language / languages: English as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info