486207
44
Zoom out
Zoom in
Previous page
1/62
Next page
RECORDING
43
Thanks to this programming system, you no longer
need to tediously enter the date, programme
number, start and end time. All the information
needed by the HDD/DVD Recorder for programming
is contained in the ShowVIew programming
number. This ShowVIew number is found in most TV
listings.
1
Insert recordable media such as DVD±R,
DVD±RW if you are recording to DVD.
2
Press [TIMER].
The ‘Select Record Method’ menu appears.
3
Select ‘ShowVIew’ with [
/
] and confirm with
[ENTER].
The ‘ShowVIew’ menu appears.
Enter the entire ‘ShowVIew’ number. This
number is up to 9 digits long and can be found
next to the start time of the TV programme in
your TV listings magazine.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the ‘ShowVIew’ number.
If you make a mistake, you can clear it with
[CLEAR].
4
Press [ENTER] to confirm.
Timer Recording using ShowVIew
system
4
Enter the necessary information for your Timer
Recording(s).
œ √
– Moves the cursor left/right.
…† – Changes the setting of the current
cursor position.
Press [SETUP] to exit the Timer Record menu.
Press [ENTER] after filling in all the program
information.
Press [TIMER] to display the Timer Record List.
5
Press [ENTER] to save the program.
The Timer Record List will appear.
6
Press [SETUP] to exit the Timer Record List.
7
Timer indicator will light or start blinking. You
must power off the HDD/DVD Recorder to start
the Timer Recording.
finishes to confirm the recorded program. If
two timer recordings are set to record
sequentially (one right after the other), the very
beginning of the later program may not be
recorded.
Timer Recording
Edit Timer
Media
PR No. PR-03
Date Jan/02 Sun
Start 13:30
End 14:30
Mode HQ
Repeat Once
Delete
Instructions:
Enter-Save Setup-Exit
Timer Recording
PR No. Date Start End Mode
PR-03 01/02 13:30 14:30 HQ
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
Select Record Method
Please choose your preferred
method for scheduling
Manual edit timer
ShowVIew
Instructions:
Enter-Confirm Setup-Exit Move …†
ShowVIew
Please enter your ShowVIew Code.
– – – – – – – – –
The Timer indicator lights on the front panel
display when the HDD/DVD Recorder is ready
for the Timer Recording.
The timer indicator will flash if any of the
following conditions occur;
- Empty or non-recordable disc is found in the
tray when DVD Timer recording starts.
- When you go into Media browser, SETUP,
Timer Recording menu after Timer Recording
setup.
- When you record the TV signal after Timer
Recording setup.
- When you play titles after Timer Recording
setup.
The HDD/DVD Recorder will automatically
power off when the Timer Recording ends.
There is a short delay when a timer recording
DG-M23D2D-FB(GB) 2006.10.4 9:13 AM ˘ ` 43 mac001 1200DPI 100LPI
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo DHR-8314- at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo DHR-8314- in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info