561889
29
Zoom out
Zoom in
Previous page
1/64
Next page
28
Virtual Surround
You can enjoy a simulated 3D effect from two speakers by setting Virtual
Surround to On.
Follow the same procedure as ‘Digital Output‘ to set the ‘Virtual
Surround’ option.
Audio
Digital Output Off
Dynamic Range Off
Virtual Surround Off
Instructions
Enter-Confirm Setup-Exit Move …†
Select Virtual
Surround
Off
On
Follow the same procedure as ‘Video’ Settings to select ‘Audio’ Settings.
Digital Output
1
Use [/] to select ‘Digital Output‘ while the ‘Audio’ submenu is
displayed.
2
Press [ENTER] or [] to go to the second level.
3
Use [/] to select the desired digital output type.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
Off
No signal will be output from the Digital Audio Out jacks.
LPCM
Select when connected to a 2 channel digital stereo amplifier. The DVD
Recorder+VCR's digital audio signal will be output in the PCM 2ch format
when you play a DVD (or VHS tape) recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD
is recorded with a DTS sound track then no sound will be heard.
Bitstream
Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby
Digital or DTS decoder).
Initial Setup
Audio
Digital Output Off
Dynamic Range Off
Virtual Surround Off
Instructions
Enter-Confirm Setup-Exit Move …†
Select Digital
Output
Off
Bitstream
LPCM
PREFERENCES / Audio Settings
Preferences
Video
Audio
Parental Controls
Auto Settings
VCR
Instructions
Enter-Confirm Setup-Exit
Move …†
Dynamic Range
While watching DVD movies, you may wish to compress the dynamic
range of the audio output (the difference between the loudest and
quietest passages). This allows you to listen to a movie at a lower
volume without losing clarity of sound. Set ‘Dynamic Range‘ to Low or
High for this effect.
Follow the same procedure as ‘Digital Output‘ to set the ‘Dynamic
Range’.
Audio
Digital Output Off
Dynamic Range Off
Virtual Surround Off
Instructions
Enter-Confirm Setup-Exit Move …†
Select Dynamic
Range
Off
Low
High
DF-L71D1P-UA/TA 04.11.24 11:51 PM 페이지28
Downloaded from www.Manualslib.com manuals search engine
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo DF-8150P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo DF-8150P in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info