561888
32
Zoom out
Zoom in
Previous page
1/64
Next page
SETUP
31
Initial Setup
1
While ‘Preferences‘ is selected, press [] to select ‘Auto Settings‘.
2
Press [ENTER] to display the submenu.
Auto Clock Set
Auto Clock enables the DVD Recorder+VCR to set the clock automatically
whenever it is in Standby mode (plugged in but powered off).
Auto Clock is only available for models with the VPS/PDC function.
Some broadcasting stations may send the time and date along with the VPS/PDC
data. The video will automatically use this time and date during the initial setting
up procedure during normal use, and every time you switch the video off at the
mains. If you find that this time and date is incorrect you can remove this feature
by following the steps below changing it to the OFF mode, you will then have to
manually set the time and date, see above.
1
Use [/] to select 'Auto Clock Set' and press [ENTER].
2
Use [/] to change the 'Auto Clock Set' status, and press [ENTER] to confirm.
AV Link
If your TV is AV Link available, you can download the channels
information from your TV set, connecting the SCART1 jack to TV.
Follow the same procedure as ‘Auto Clock Set’ to set the ‘AV Link’ status.
VPS/PDC
VPS/PDC is a service provided by some stations to enable you to perform
timer recordings precisely even if the broadcaster delays the start time of
the programme slightly. The time you enter is the VPS/PDC time so this
must be correct. Not all stations offer VPS/PDC, in which case the player
will start at the time you enter and not the actual start time of the
programme.
If you wish to start recording at a specific time without it being adjusted
by the VPS/PDC system in the event of a delay, switch VPS/PDC off
otherwise the player will not record.
Follow the same procedure as ‘Auto Clock Set’ to set the ‘VPS/PDC’
status.
Preferences
Video
Audio
Parental Controls
Auto Settings
VCR
Instructions
Enter-Confirm Setup-Exit
Move …†
PREFERENCES / Auto Settings
Auto Settings
Auto Clock Set Off
AV Link Off
VPS/PDC Off
Instructions
Enter-Confirm Setup-Exit Move …†
Auto Settings
Auto Clock Set On
AV Link Off
VPS/PDC Off
Instructions
Enter-Confirm Setup-Exit Move …†
Auto Settings
Auto Clock Set On
AV Link On
VPS/PDC Off
Instructions
Enter-Confirm Setup-Exit Move …†
Select Auto
Clock Status
Off
On
Select AV
LInk Status
Off
On
Select VPS/
PDC Status
Off
On
"VPS/PDC" and "Auto Clock Set" are not provided for some countries.
DF-L71D1P-UA/TA 04.11.24 11:51 PM 페이지31
Downloaded from www.Manualslib.com manuals search engine
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo DF-8100P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo DF-8100P in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info