36
VCR Playback
Fast Forward/Backward
This function lets you visually search forward and
backward for a desired scene on your tape.
1 Press [REW] or [FF] during playback and Search
mode will be activated.
If the DVD Recorder+VCR is left in Search mode
for more than 3 minutes, the DVD Recorder+VCR
will automatically resume Play mode to protect the
tape and video heads.
2 To return to normal playback, press [PLAY].
Still Picture
1 Press [PLAY/PAUSE] during playback.
A still picture appears on the TV screen.
If a still picture vibrates vertically, stabilize it by
using the [TRACKING +/-] buttons on the remote
control.
If the DVD Recorder+VCR is left in still mode for
more than 5 minutes, the DVD Recorder+VCR
will automatically resume Play mode to protect the
tape and video heads.
2 To return to normal playback, press [PLAY].
Slow Motion
1 Press [SLOW+] for Slow Motion playback.
2 Press [SLOW+] and [SLOW-] repeatedly to adjust
the Slow Motion playback speed.
Counter Memory Function
This is useful if there is a section of tape you want to
view immediately after recording or if you want to
return to the same point several times.
1 Begin recording or playing a tape.
2 At the point you want to locate later, reset the real-
time counter to 0:00:00 by pressing [CLEAR].
Continue to play or record.
3 Press [STOP] when recording or playback
finishes.
4 You can make the tape automatically stop when
the counter returns to about ‘0:00:00‘ by selecting
"Go-to-Zero" function in the ‘SETUP’
➝
’Preferences’ ➝ ’VCR’. See page 28.
Notes on special playback features (EG:
FFW or FBWD)
Horizontal lines (noise bars) will appear on the TV
screen. This is normal.
The audio is automatically muted during special
playback modes, so there is no sound during
search, slow motion, etc.
During high-speed picture search, a short time is
needed to stabilise the tape speed when re-
entering Play mode. Slight interference may be
observed during this time.
Special Playback Features
DF-H3512P-UL¿ 2008.1.25 5:21 PM ˘ ` 36 mac001 1200DPI 100LPI
