12
Channels order changing
Select the programme to move using remote control
CURSOR UP/ DOWN buttons.
Press the remote control
NORMAL/OK
button : the
programme appears on red and can be moved to
another place using remote control CURSOR UP/
DOWN buttons.
When required position is reached, confirm this new
position pressing the remote control
NORMAL/OK
button. Then, the programme appears again on green.
Station name entering - copying a programme to
another programme number
Use Install menu "NAME" and " STORE TO" functions
as explained in manual channel tuning paragraph.
Choose starting point
Select with "PROGRAM" function the programme from
which you want to start manual tuning.Then, the channel
number, the frequency, the name and the programme
number of this programme are displayed in the install
menu.
TV system selection
If necessary, you can modify TV system :
- Select “SYSTEM” function
- Choose between :
EURO (B/G), E/EURO (D/K) systems
Then, the programme displayed on screen is changed
to the system chosen.
Channel searching
Select "FREQ." function.
Press the remote control CURSOR RIGHT / LEFT buttons
for more than 3 seconds to start (up / down) manual
tuning.
After searching, tuning will stop automatically to the next
channel. (To stop searching press the remote control
MENU button)
MANUAL CHANNEL SETTINGS
MANUAL CHANNEL SETTINGS
* Note: If you know channel number or frequency of
channels you want to search, you can tune
directly to these channels, entering these data
directly into "CHANNEL" or "FREQ." function.
