595165
16
Zoom out
Zoom in
Previous page
1/22
Next page
Drive Partner for your Safety
28
BX1000 / BX1000 Plus User Guide
www.d-teg.com
29
Caution
Once the record setting was changed, all recorded data in SD card will be
removed automatically.
SETTING DRIVE RECORDER
Select Backup [YES] or [NO] before lost the all recorded data.
Beep on record “Beep” sound ON/OFF when Event recording start
G-sensor setting
Check simple setting mode and then change the
sensitivity
. High sensitivity like 8 or 9 means
recording will be started at very low impact.
Date / Time
Automatically synchronize with GPS time.
However Manual time setting is also available.
Vehicle ID Type your Vehicle ID
Initialize SD card
All
datawillbedeletedandsetthecongurationof
the Drive Recorder will default to the factory settings.
Initialize Data All data will be deleted.
SETTING DRIVE RECORDER
G-Sensor setting
If G-sensor sensitivity value is too high like
8 or 9, it becomes too sensitive, so it will
detect even a light impact or light turn. If
G-sensor sensitivity value is too dull, so it
might not detect a notable incident.
So, sensitivity should be set in
consideration of the vehicle’s suspension
and condition and also the road condition.
[BX1000]
doesn’t have the GPS time
sync. function, so please click the manual
time setting, and set your time before
installing it in your car.
NEW SD Memory card should be initialized through Tool menu.
STEP1. Insert new SD memory card into the PC.
STEP2. Run “PC Viewer BX1000”
STEP3. Select [Tool] and then click [SD Initialize]
We recommend the [SD initialize] at least once per month to
prevent the BX1000 / BX1000 Plus from any software errors.
[BX1000 Plus] has the automatic GPS Time Synchronize function. with the internal GPS.
The time recording is done based on UTC at the BX1000 Plus and automatically converts
to the local time at the PC according to the PC time zone setting when playing back using
the PC Viewer.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Teg Smarty BX1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Teg Smarty BX1000 in the language / languages: English as an attachment in your email.

The manual is 7,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info