728146
119
Zoom out
Zoom in
Previous page
1/136
Next page
Unied Access Point Administrator’s Guide
Unied Access Point Administrator’s Guide
Page 119
October 2017
Section 9 - Clustering Multiple APs
Field Description
Beacon Interval Shows the Beacon interval being used by this access point.
Beacon frames are transmitted by an access point at regular intervals to announce the
existence of the wireless network. The default behavior is to send a beacon frame once
every 100 milliseconds (or 10 per second).
Beacon Age Shows the date and time of the last beacon received from this access point.
Table 72 - Cluster Member Details
Wireless Neighbourhood supports Clustering Options, Single IP Management, and Secure Join Clustering. For
more details, please refer to following sections: “Cluster Options” on page 111, “Single IP Management” on page
111, and “Secure Join Clustering” on page 111.
Note: Currently, Clustering Options, Single IP Management, and Secure Join Clustering features
are available only in DWL-3610AP and DWL-6610B1AP.
Cluster Firmware Upgrade
Cluster provides a centralized cluster rmware upgrade feature that allows all the APs in the cluster to be upgraded
from the dominant AP. The Cluster rmware upgrade can be performed only from the dominant AP. For each member
access point, the cluster rmware upgrade page shows identifying information (All members checkbox or selective
members checkbox, IP Address, Firmware Version and Firmware transfer status).
Viewing Details for a Cluster Firmware Upgrade
The following table explains the details shown about the selected AP and other elds of Cluster Firmware upgrade
page.
Field Description
Members The Members eld displays (cluster member) access points. The total supported cluster
members are 10.
IP Address Shows the IP address of the member access points.
MAC Address Shows the MAC address of the member access points.
Firmware Version Shows current running rmware version of the cluster member.
Firmware-transfer-
status
Shows whether the rmware download and validation in cluster member is successful or
failure. It displays any of the following statuses: None/Started/Donwloaded/Success/Fail/
Abort_admin/Abort_local/Dap_resigned.
Firmware-transfer-
progress-bar
Shows the progress bar for rmware download. This eld will be displayed only when
rmware download is in progress to non-dominant members.
Upload Method Administrator planning to use centralized cluster rmware must provide a TFTP or HTTP/
HTTPS mechanism for Dominant AP to download the AP image. The image is downloaded
and stored in the ram disk (/tmp) of the dominant AP as a le
New Firmware
Image
Show the New Firmware Image selected.
OverAll Upgrade
Status
Shows the Overall upgrade status (In_progress/Completed/Fail/Abort_admin/None).
Start-Upgrade Starts the image upgrade of all members or selectively.
Stop Stop the Image upgrade of all members or selected members.
Table 73 - Cluster Firmware Upgrade
Cluster Firmware Upgrade supports Clustering Options, Single IP Management, and Secure Join Clustering. For
more details, please refer to following sections: “Cluster Options” on page 111, “Single IP Management” on page
111, and “Secure Join Clustering” on page 111.
Note: Currently, Single IP Management and Secure Join Clustering features are available only in
DWL-3610AP and DWL-6610B1AP.
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DWL-8710AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DWL-8710AP in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info