728146
38
Zoom out
Zoom in
Previous page
1/136
Next page
Unied Access Point Administrator’s Guide
Unied Access Point Administrator’s Guide
Page 38
October 2017
Section 4 - Managing the Access Point
Note: After you congure the wired settings, you must click Apply to apply the changes and
to save the settings. Changing some settings might cause the AP to stop and restart system
processes. If this happens, wireless clients will temporarily lose connectivity. We recommend that
you change AP settings when WLAN trafc is low.
Note: Management IPv6 is available as a separate tab in few models of DWL.
IPv6 Tunnel
The ISATAP (Intra-Site Automatic Tunnel Addressing Protocol) provides the support for encapsulating IPv6 packets
within IPv4 packets to allow transmission over IPv4 networks. This feature provides AP to act as an initiator of the
tunnel and will allow communication with remote IPv6 hosts. An ISATAP router acts as the end of the tunnel within the
network to help AP to auto-congure ISATAP tunnel interface.
From the IPv6 Tunnel page, you can enable, congure, and display ISATAP global operational and conguration
parameters.
Figure 18 - Modify IPv6 Tunnel Settings
Field Description
ISATAP Status Select Enable or Disable Administrative ISATAP tunnel status.
ISATAP Capable
Host
Specify the IP Address or DNS name of the ISATAP router. The default value is isatap.
ISATAP Query
Interval
The number of seconds from 120-3600 between DNS queries (before the IP address of the
ISATAP router is known) for this tunnel. The interval can be a default value (120 seconds) or
a user dened interval.
ISATAP Solicitation
Interval
The number of seconds from 120-3600 between ISATAP router solicitations messages,
when there is no active ISATAP router. The interval can be the default value (120 seconds)
or a user dened interval.
ISATAP IPv6 Link
Local Address
Displays link-local IPv6 address of ISATAP interface.
ISATAP IPv6 Global
Address
Displays global IPv6 address of ISATAP interface.
Table 19 - IPv6 Tunnel Settings
To apply your changes, click Update. Changing some settings might cause the AP to
stop and restart system processes. If this happens, wireless clients will temporarily lose
connectivity. We recommend that you change AP settings when WLAN trafc is low.
Wireless Settings
Wireless settings describe aspects of the local area network (LAN) related specically to the radio device in the
access point (802.11 Mode and Channel) and to the network interface to the access point (MAC address for access
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DWL-8710AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DWL-8710AP in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info