728147

D-Link DWL-6620APS Manual

104
Zoom out
Zoom in
Previous page
1/136
Next page
Unied Access Point Administrator’s Guide
Unied Access Point Administrator’s Guide
Page 104
October 2017
Section 8 - Conguring Client Quality of Service (QoS)
Field Description
EtherType Select the EtherType eld to compare the match criteria against the value in the header of
an Ethernet frame.
Select an EtherType keyword or enter an EtherType value to specify the match criteria.
Select from List Select
Select one of the following protocol types:
•) appletalk
•) arp
•) ipv4
•) ipv6
•) ipx
•) netbios
•) pppoe
Match to Value
Enter a custom protocol identier to which packets are matched. The value is a four-digit
hexidecimal number in the range of 0600 – FFFF.
Class of Service Select the eld and enter a class of service 802.1p user priority value to be matched for the
packets. The valid range is 0 – 7.
Source MAC
Address
Select this eld and enter the source MAC address to compare against an Ethernet frame.
Source MAC Mask Enter the source MAC address mask specifying which bits in the destination MAC to
compare against an Ethernet frame.
An f indicates that the address bit is signicant, and a 0 indicates that the address bit is to be
ignored. A MAC mask of ff:ff:ff:ff:ff:ff matches a single MAC address.
Destination MAC
Address
Select this eld and enter the destination MAC address to compare against an Ethernet
frame.
Destination MAC
Mask
Enter the destination MAC address mask specifying which bits in the destination MAC to
compare against an Ethernet frame.
An f indicates that the address bit is signicant, and a 0 indicates that the address bit is to be
ignored. A MAC mask of ff:ff:ff:ff:ff:ff matches a single MAC address.
VLAN ID Select the eld and enter a VLAN ID to be matched for packets. The VLAN ID range is 0 –
4095.
IPv4 Class Maps
Service Type You can specify one type of service to use in matching packets to class criteria.
IP DSCP To use IP DSCP as a match criteria, select the check box and select a DSCP value keyword
or enter a DSCP.
Select from List
Select from a list of DSCP types.
Match to Value
Enter a DSCP Value to match (0 – 63).
IP Precedence Select this eld to match the packet’s IP Precedence value to the class criteria IP
Precedence value.
The IP Precedence range is 0 – 7.
IP TOS Bits Select this eld and enter a value to use the packet’s Type of Service bits in the IP header
as match criteria.
The TOS bit value ranges between (00 – FF). The high-order three bits represent the IP
precedence value. The high-order six bits represent the IP Differentiated Services Code
Point (DSCP) value.
IP TOS Mask Enter an IP TOS mask value to perform a boolean AND with the TOS eld in the header of
the packet and compared against the TOS entered for this rule.
The TOS Mask can be used to compare specic bits (Precedence/Type of Service) from the
TOS eld in the IP header of a packet against the TOS value entered for this rule. (00 – FF).
Delete Class Map Check to delete the class map selected in the Class Map Name menu. The class map
cannot be deleted if it is already attached to a policy.
Table 59 - DiffServ Class Map
To delete a Class Map, select the Delete Class Map option and click Apply.
… 104 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DWL-6620APS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DWL-6620APS in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of D-Link DWL-6620APS

D-Link DWL-6620APS Installation Guide - English - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info