728147
37
Zoom out
Zoom in
Previous page
1/136
Next page
Unied Access Point Administrator’s Guide
Unied Access Point Administrator’s Guide
Page 37
October 2017
Section 4 - Managing the Access Point
Field Description
Hostname Enter a hostname for the AP. The hostname appears in the CLI prompt.
•) The hostname has the following requirements:
•) The length must be between 1 – 63 characters.
•) Upper and lower case characters, numbers, and hyphens are accepted.
•) The rst character must be a letter (a – z or A – Z), and the last character cannot be a
hyphen.
MAC Address Shows the MAC address for the LAN interface for the Ethernet port on this AP. This is a
read-only eld that you cannot change.
Management VLAN
ID
The management VLAN is the VLAN associated with the IP address you use to access the
AP. The default management VLAN ID is 1.
Provide a number between 1 and 4094 for the management VLAN ID.
Untagged VLAN If you disable the untagged VLAN, all trafc is tagged with a VLAN ID.
By default all trafc on the UAP uses VLAN 1, which is the default untagged VLAN. This
means that all trafc is untagged until you disable the untagged VLAN, change the untagged
trafc VLAN ID, or change the VLAN ID for a VAP or client using RADIUS.
Untagged VLAN ID Provide a number between 1 and 4094 for the untagged VLAN ID. Trafc on the VLAN that
you specify in this eld will not be tagged with a VLAN ID.
Connection Type If you select DHCP, the UAP acquires its IP address, subnet mask, DNS, and gateway
information from a DHCP server.
If you select Static IP, you must enter information in the Static IP Address, Subnet Mask,
and Default Gateway elds.
Static IP Address Enter the static IP address in the text boxes. This eld is disabled if you use DHCP as the
connection type.
Subnet Mask Enter the Subnet Mask in the text boxes.
Default Gateway Enter the Default Gateway in the text boxes.
DNS Nameservers Select the mode for the DNS.
In Dynamic mode, the IP addresses for the DNS servers are assigned automatically via
DHCP. This option is only available if you specied DHCP for the Connection Type.
In Manual mode, you must assign static IP addresses to resolve domain names.
IPv6 Connection
Type
If you select DHCPv6, the UAP acquires its IPv6 address, DNS, and gateway information
from a DHCPv6 server.
If you select Static IPv6, you must enter information in the Static IPv6 Address, Prex
length, and Default Gateway elds.
IPv6 Admin Mode Enable or disable IPv6 management access to the AP
IPv6 Auto Cong
Admin Mode
Enable or disable IPv6 auto address conguration on the AP.
When IPv6 Auto Cong Mode is enabled, automatic IPv6 address conguration and gateway
conguration is allowed by processing the Router Advertisements received on the LAN port.
The AP can have multiple auto congured IPv6 addresses.
Static IPv6 Address Enter a static IPv6 address. The AP can have a static IPv6 address even if addresses have
already been congured automatically.
Static IPv6 Address
Prex Length
Enter the static IPv6 prex length, which is an integer in the range of 0 – 128.
IPv6 Autocongured
Global Addresses
If the AP has been assigned one or more IPv6 addresses automatically, the addresses are
listed.
IPv6 Link Local
Address
Shows the IPv6 Link Local address, which is the IPv6 address used by the local physical
link. The link local address is not congurable and is assigned by using the IPv6 Neighbor
Discovery process.
Default IPv6
Gateway
Enter the default IPv6 gateway.
IPv6 Domain
Nameservers
Select the mode for the DNS.
In Dynamic mode, the IPv6 addresses for the DNS servers are assigned automatically via
DHCPv6. This option is available only if DHCPv6 is selected for the Connection Type.
In Manual mode, you must assign static IPv6 addresses to resolve domain names.
Table 18 - Ethernet Settings
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DWL-6620APS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DWL-6620APS in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of D-Link DWL-6620APS

D-Link DWL-6620APS Installation Guide - English - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info