728119
345
Zoom out
Zoom in
Previous page
1/378
Next page
D-Link DSR-Series User Manual 331
Appendix D - Log Output Reference
DES Hardware Test Duration: %d:%d, DEBUG try_module_get failed WARNING
SHA Software Test: %d iterations, iter DEBUG try_module_get failed \ WARNING
SHA Software Test Duration: %d:%d, DEBUG %s: unknown pairwise cipher %d, WARNING
SHA Hardware Test: %d iterations, iter DEBUG %s: unknown group cipher %d, WARNING
SHA Hardware Test Duration: %d:%d, DEBUG %s: unknown SIOCSIWAUTH ag %d, WARNING
MD5 Software Test: %d iterations, iter DEBUG %s: unknown SIOCGIWAUTH ag %d, WARNING
MD5 Software Test Duration: %d:%d, DEBUG %s: unknown algorithm %d, WARNING
MD5 Hardware Test: %d iterations, iter DEBUG %s: key size %d is too large, WARNING
MD5 Hardware Test Duration: %d:%d, DEBUG unable to load %s, scan_
modnames[mode] WARNING
./pnac/src/pnac/linux/kernel/
xcalibur.c:209:#dene DEBUG_PRINTK printk DEBUG Failed to mkdir /proc/net/madwi WARNING
bcmDeviceInit: registration failed DEBUG try_module_get failed WARNING
bcmDeviceInit: pCdev Add failed DEBUG %s: request_irq failed, dev->name WARNING
REG Size == 8 Bit DEBUG too many virtual ap’s (already got %d),
sc->sc_nvaps WARNING
Value = %x ::: At Page = %x : Addr = %x DEBUG %s: request_irq failed, dev->name WARNING
REG Size == 16 Bit DEBUG rix %u (%u) bad ratekbps %u mode
%u, WARNING
Value = %x ::: At Page = %x : Addr = %x DEBUG cix %u (%u) bad ratekbps %u mode
%u, WARNING
REG Size == 32 Bit DEBUG %s: no rates for %s?, WARNING
Value = %x ::: At Page = %x : Addr = %x DEBUG no rates yet! mode %u, sc->sc_
curmode WARNING
REG Size == 64 Bit DEBUG %u.%u.%u.%u sent an invalid ICMP WARNING
REG Size is not in 8/16/32/64 DEBUG dst cache overow WARNING
Written Value = %x ::: At Page = %x : Addr = %x DEBUG Neighbour table overow. WARNING
bcm_ioctl :Unknown Ioctl Case : DEBUG host %u.%u.%u.%u/if%d ignores WARNING
=========Register Dump for Port Number #
%d=========,port DEBUG martian destination %u.%u.%u.%u
from WARNING
%s : Read Status=%s data=%#x,regName[j], DEBUG martian source %u.%u.%u.%u from WARNING
%s : Read Status=%s data=%#x,regName[j], DEBUG ll header: WARNING
powerDeviceInit: device registration failed DEBUG %u.%u.%u.%u sent an invalid ICMP WARNING
powerDeviceInit: adding device failed DEBUG dst cache overow WARNING
%s: Error: Big jump in pn number. TID=%d, from
%x %x to %x %x. DEBUG Neighbour table overow. WARNING
%s: The MIC is corrupted. Drop this frame.,
__func__ DEBUG host %u.%u.%u.%u/if%d ignores WARNING
%s: The MIC is OK. Still use this frame and update
PN., __func__ DEBUG martian destination %u.%u.%u.%u
from WARNING
ADDBA send failed: recipient is not a 11n node DEBUG martian source %u.%u.%u.%u from WARNING
Cannot Set Rate: %x, value DEBUG ll header: WARNING
Getting Rate Series: %x,vap->iv_xed_rate.series DEBUG %u.%u.%u.%u sent an invalid ICMP WARNING
Getting Retry Series: %x,vap->iv_xed_rate.
retries DEBUG dst cache overow WARNING
IC Name: %s,ic->ic_dev->name DEBUG Neighbour table overow. WARNING
345


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DSR-250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DSR-250 in the language / languages: English as an attachment in your email.

The manual is 32,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info