Use the Inbound IP Filter menu to create WAN to LAN incoming traffic filtering rules that will block traffic as specified. Note that the default IP Filter setting blocks all
incoming IP traffic when the firewall is enabled. Use the Inbound Filter menu to specify the traffic that will be allowed.
Type a Filter Name used for the rule, select the Protocol and type the Source IP
Address and Subnet Mask, and Source Port if necessary. The Destination IP
Address, Subnet Mask and Port can also be specified if required. Click the Add/Apply
button to create and activate the new filtering rule.
The new rule appears listed in the Active Inbound IP Filter list. A rule can be deleted by
selecting the Remove option for the rule and clicking the Remove Selected button.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for D-Link DSL-2640R at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of D-Link DSL-2640R in the language / languages: English as an attachment in your email.
The manual is 4,87 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.